Dimplex ZWU 06E Installation And Operating Instructions Manual page 16

Overview of factory settings
Level 2
Menu – Installer
Detail settings
16
Level 3
Heat demand
Charge release
Charging model
Control system
Options
Level 4
Sensor type
Full charging (E1)
Start of charging (E2)
Base charge at start of charging
(E15)
Heat demand factor
Building type: Structure and
insulation
Outside-temp. (OT) lower limit
for blocking high tariff
Substitute temperature
Correction value for sensor
Start signal of clockwork (LL)
Inhibit signal high tariff (HT)
Main charging time (E3)
Timer lock-in time (E11)
Cycle time (E13)
Daytime changeover (E12)
Daytime additional charge factor
(E10)
Base charge at end of cycle
time (E4)
Charge release monitoring
(E14)
Forward control LF+LZ at
daytime (VRT)
Duty cycle (ED) system
Controller type at duty cycle
(ED) system
Duty cycle (ED) system with 2%
base signal
DC system
Invert DC-KU signal
Internet Gateway
Sequencer
Domestic control unit Classic central charge
(ACU) unit (CCU)
Dimplex standard Dimplex standard
sensor DIN sensor DIN
-12°C -12°C
18°C 18°C
5% 5%
100% 100%
normal + normal normal + normal
Off Off
5°C 5°C
+0K +0K
Not present LF → LL
Off Off
Not present 7h
Not present 6h
Not present 22h
Not present 10h
Not present 90%
Not present 25%
Not present 15h
Not present No
80% 80%
electronic electronic
On On
ZX = Z1 (+); Z0 = Z2 (-); ZX = Z1 (+); Z0 = Z2 (-);
ZY = KV ZY = KV
Off Off
No Not present
Off Not present