Philips AVENT SCD841 Manual page 36

VIDEO DISPLAY
Why isn't there any
image on the video
display while the link light
is green?
Why isn't the image on
the video display clear?
General information
Rechargeable Li-ion battery (2600mAh)
FHSS frequency band 2.4GHz.
Maximum radio-frequency power: <=20dBm
Supply unit:
Model: ASSA105E-050100 (EU plug) or
ASSA105B-050100 (UK plug)
Input: 100-240V 50/60Hz ~0�35A
Output: 5,0V 1,0A, 5,0W
Average active efficiency: >=73,62%
No-load power consumption (W): 0�1W
The parent unit may be in the AUDIO, VOX or ECO mode. Press the mode
button on the right side of the parent unit to switch modes (see 'Modes')�
The display brightness may be set too low� Increase the display
brightness on the parent unit using the control button in the centre (see
'Brightness')�
Perhaps the lens of the baby unit is dirty� Clean the lens with a dry cloth�
The baby unit may be too far away from your baby� Make sure the
baby unit is not further than 1�5 meters / 5 feet away from your baby
for optimal video quality� Closer than 1 meter / 3�5 feet increases
strangulation hazard�
- English 34 -