Table of Contents
Advertisement
6.16 RS232 Interface
Use simplified RS232 standard, not support hardware contact function
Transmite baud rate：115200, 57600, 38400, 9600
The maximum transmit distance：15m
Communication command is in SCPI format, and all commands and data on the bus are transmitted by ASCII code.
6.17 HANDLER Interface
Acceptable trigger signal（/TRIG）
Output comparsion signal（/NG, /BIN1, /BIN2, /BUN3, /AUX）
Output control signal（/EOM）
Output Optoelectronic isolation whe logical low level is valid
Built-in pull-up resistor use external power supply by default
UTR2810E Series LCR Meter – User Manual
34
Advertisement
Table of Contents
