Display Area - UNI-T UTR2810E Series User Manual

2.3 Display Area

The UTR2810E display area is divided into the following parts, see Figure 2-3
2.3.1 MEAS DISP
Dispaly Primary parameter Z/R/L/C/G /Y
Secondary paramter X/Q/D /R/Θ（deg）/Θ（rad）/B
2.3.2 SET DISP
(1) Paramter A
Z： Impedance value measurement
R： Resistance value measurement
L: Inductance value measurement
C： Capacitance value measurement
G: Conductance value measurement
Y: Admittance measurement
(2) Paramter B
X: Reactance measurement
Q：Quailty factor measurement
D：Loss value measurement
R：Resistance value measurement
Θ（rad）：Phase angle（arc）
Θ（deg）: Phase angle
B：Susceptance value measurement
(3) Frequency
100 Hz：The current measured signal frequency is 100 Hz.
120 Hz：The current measured signal frequency is 120 Hz.
1 kHz： The current measured signal frequency is 1 kHz.
10 kHz：The current measured signal frequency is 10 kHz.
Figure 2-3 Display Area
11
UTR2810E Series LCR Meter – User Manual