Citizen COMPACT CT-S310II Service Manual page 59

3) Changing the setting of the memory switch
When the setting change mode is selected, the setting item and its current status are printed
out.
Power ON Info
Setting item
(1) Selecting the setting item to change
To skip the current setting, hold down the FEED switch (two seconds or longer) to move
to the next setting item.
4) Returning to the memory switch select mode
When the necessary setting has been made, open the printer cover and close it.
The setting of the memory switch after change is printed out.
5) Saving the setting change and ending the memory switch setting mode
Press the FEED switch for a short time repeatedly until "Write/Factory Setting" is selected.
Hold down the FEED switch.
The new setting is printed out. Then the memory switch setting mode is ended and normal
printing operation becomes possible.
* Note that the setting change will not be saved unless this operation is performed.
6) Initializing the memory switch
To initialize the memory switch setting, select "Write/Factory Setting" by following the
procedure described in 5). Open the printer cover and hold down the FEED switch.
The memory switch setting is initialized.
* All of the settings are reset to the default settings.
( Valid )
Current status
- 57 -
CT-S310II Series Service Manual
The ERROR LED lights up when the
value currently selected is printed.