2. TROUBLESHOOTING
Error Details and LED Indications
2-1.
When an error is detected, the two LEDs indicate the error status in the following patterns.
LED on the panel
1)
POWER LED (green)
Lit:
Power supplied
Blinking:
Memory check error, hex-dump mode, memory switch setting mode
Not lit:
Power not supplied
2)
ERROR LED (red)
Lit:
Cover open, paper end
Blinking:
Occurrence of an error, waiting for macro execution
Not lit:
Normal operation
Error Details and LED Indications
1)
Automatically recoverable errors
(1) Print head hot
Description:
Recovery condition:
When the head temperature is raised (approx. 70C or above), printing
operation is stopped and the ERROR LED blinks to protect the print head
from overheat.
When the head temperature is lowered (approx. 65C or lower), printing
operation is automatically restarted.
Automatically recovered when the temperature is lowered.
POWER LED (green)
Lit
- 25 -
CT-S310II Series Service Manual
ERROR LED (red)
Blinks (long flash pattern)