Citizen COMPACT CT-S310II Service Manual page 16

CT-S310II Series Service Manual
Remove "SLIDE, HEAD SPRING-03" and "CABLE, HEAD FFC" from "SA, THERMAL HEAD-03".
SLIDE, HEAD SPRING-03
CABLE,
HEAD FFC
<Precaution at reassembly>
Check the mounting position of "SLIDE, HEAD SPRING-03".
Connect "CABLE, HEAD FFC" with the conducting face facing upward.
Since the connector pins are sharply pointed, never touch the connector terminal.
Remove "SCREW, BH, M3.0  4" that fasten "SA, THERMAL HEAD-03" and "HOLDER, HEATSINK-03".
SCREW, BHT (ST), M3.0  6
<Precaution at reassembly>
Align the bosses at "HOLDER, HEATSINK-03" with the holes at "SA, THERMAL HEAD-03".
Conducting face
- 14 -
Check the positions.
Be careful not to touch the
connector terminal.
Hole for boss