CT-S310II Series Service Manual
Remove one "SCREW, BHT (ST), M3.0 6" that fastens "LEVER R, PLATEN LOCK" and "LEVER,
COVER OPEN-03".
LEVER, COVER OPEN
SCREW, BHT (ST), M3.0 6
<Precaution at reassembly>
When reassembling, align the boss at "LEVER, COVER OPEN" with the hole at "LEVER R, PLATEN LOCK".
Raise the rotating shaft a little while moving down "LEVER R, PLATEN LOCK" and align it with the slot
at "FRAME, MAIN-03" and remove the shaft through the shaft hole.
LEVER R, PLATEN LOCK
Pull "PLATE, PLATEN LOCK LEVER" out.
PLATE, PLATEN LOCK LEVER
Hole for boss
Slot
Shaft
<Precaution at disassembly / reassembly>
To keep the hook at "LEVER R, PLATEN LOCK"
clear of "FRAME, MAIN", raise the rotating shaft
slightly when removing it.
When reassembling, align the slot position with the
shaft hole and return the lever in place.
<Precaution at disassembly / reassembly>
When reassembling, check the orientation.
- 18 -
Holes