4.QUESTIONS FOR SCANNING
OCR does not work properly.
If OCR does not work properly when an original is scanned, check the following items.
The OCR option is installed in the equipment.
The OCR setting is enabled.
Change the OCR settings as below.
Select the language setting of OCR so that it matches that for the original.
Enable auto rotation for OCR.
Increase the scanning resolution.
When scanning documents using the ADF, set the scanning density to be lower than the middle.
For details, see the reference below:
Scan - USEFUL FUNCTIONS - Changing Scan Settings - Settings for reading out original characters (OCR)
Show-through occurs.
If show-through occurs in the scanning of a 2-sided original, this level could be lowered by using the background
adjustment function. For details, see the reference below:
Scan - USEFUL FUNCTIONS - Changing Scan Settings - Adjusting the background density
Questions for Scanning 33