Recording The Sound Of An Spd-Sx Performance; (Perform & Record) - Roland SPD-SX Owner's Manual

Sampling
Recording the Sound of an SPD-SX Performance (PERFORM & RECORD)
The sound of your performance on the SPD-SX can be recorded and saved as a wave.
Preparations for sampling
1.
Press the [SAMPLING] button to access the SAMPLING screen.
2.
Use the cursor [ ] [
The sampling setup screen will appear.
3.
Use the cursor buttons and the [-] [+] buttons to make settings for sampling.
Parameter
SOURCE
REC LEVEL
4.
Press the [F1] (STBY) button.
Start sampling
5.
Press the [F2] (START) button to start sampling.
Perform on the SPD-SX.
While sampling is occurring, the screen will indicate "NOW SAMPLING... "
6.
Press the [F3] (STOP) button at the moment you want to stop sampling.
The sampling result screen will appear.
Saving the sampled waves
7.
Save the sampled waves (p. 31).
38
] buttons to select "RECORDING," and press the [ENTER] button.
Value Explanation
KIT001–100 Select the kit that you want to play.
Select the kit and pad to which the recorded performance is to be assigned.
KIT001–100
* You can only select an empty pad, one which has no wave assigned to it.
Adjust the volume for sampling.
Play the pads, and adjust the volume until it's as high as you can get it without causing the
level overload indication to appear.
0–100
Level meter Level overload indication