Playing The Second Wave (Sub); Applying A Kit Effect (Kit Fx) - Roland SPD-SX Owner's Manual

Customizing a Kit

Playing the Second Wave (SUB)

Here you can make settings for the second wave (sub wave).
Make these setting when you want two waves to sound simultaneously from a single pad.
Parameter
SUB
VOLUME
PAN
The sub-wave will sound according to the following settings.
Parameter
MUTE GROUP
TEMPO SYNC
LOOP

Applying a Kit Effect (KIT FX)

The kit effects provide a choice of 20 different effect types.
Two kit effects (FX1 and FX2) can be applied to each kit.
1.
Choose MENU KIT FX.
2.
Turn the kit effect on.
Turn FX1 SW "ON" if you want to turn FX1 on, and turn FX2 SW "ON" if you want to turn FX2 on.
MEMO
You can also turn the kit effects on/off from the top screen (p. 23).
3.
Edit the parameters.
When you switch the effect type (FX1 TYPE or FX2 TYPE), the editable parameters for each effect type will be shown.
For details on the effect types and their parameters, refer to the Effect Guide.
For the procedure, refer to "Basic Editing Procedure" (p. 16).
MEMO
The Effects Guide can be downloaded from the Roland website.
Visit the following URL, choose "owner's manuals, " and search for the model name "SPD-SX. "
http://www.roland.com/support/en/
46
Value Explanation
Selects the wave that will be sounded by the pad.
MEMO
• The SPD-SX contains preload waves.
00001–10000
• The preload waves are also stored on the supplied CD-ROM. If you want to make use of
the preload waves that came with the unit when it left the factory, load waves from a USB
flash drive or your personal computer (p. 39).
• By holding down the [PAD CHECK] button and using the [-] [+] buttons you can select the
wave in steps of 10.
0–100 Adjusts the volume of the sub wave.
L15–CENTER–R15 Adjusts the stereo position (left/right balance) of the sound.
Value
Same setting as MAIN (p. 45)
OFF
OFF
Parameter Value
TRIG TYPE
OFF
DYNAMICS Same setting as MAIN (p. 45)
POLY/MONO MONO