Dividing A Wave (Chop) - Roland SPD-SX Owner's Manual

Sampling

Dividing a Wave (CHOP)

Here's how to create new waves by chopping (dividing) an existing wave.
Preparations for sampling
1.
Press the [SAMPLING] button to access the SAMPLING screen.
2.
Use the cursor [ ] [
The sampling setup screen will appear.
3.
Use the cursor buttons and the [-] [+] buttons to make settings for sampling.
Parameter
SOURCE
Start sampling
Example: Chopped to pad 7 and pad 9
4. Start sampling to
pad 7
Pad 7
36
] buttons to select "CHOP," and press the [ENTER] button.
Value Explanation
KIT001–100, PAD1–9 Select the original wave that you want to chop.
Select the kit to which the chopped waves are to be assigned.
KIT001–100
* You can only select an empty kit in which no wave has been assigned to any of the pads.
5. Start sampling to
pad 9
Pad 9
6. Stop sampling
Pad 7
Chopped to pad 7
and pad 9