Selecting The Wave Played By A Pad (Main); Specifying How The Wave Is Sounded (Mode) - Roland SPD-SX Owner's Manual

Selecting the Wave Played by a Pad (MAIN)

Here you can make basic settings such as selecting the wave played by a pad and specifying its volume.
Parameter Value
WAVE 00001–10000
VOLUME
0–100
PAN L15–CENTER–R15
MUTE GROUP OFF, 1–9
TEMPO SYNC
OFF, ON

Specifying How the Wave is Sounded (MODE)

Here you can specify how the wave will be sounded.
Parameter Value
Specifies how the wave will be sounded.
* If you set TEMPLATE, the MODE parameters will be set to suitable values.
TEMPLATE SINGLE
PHRASE
LOOP
LOOP
OFF, ON, x2, x4, x8
Specifies how the wave will play when you play the pad.
TRIG TYPE
SHOT
ALT
DYNAMICS OFF, ON
Specifies whether the wave will play polyphonically or monophonically.
POLY/MONO MONO
POLY
Explanation
Selects the wave played by the pad.
MEMO
• The SPD-SX contains preload waves.
• The preload waves are also stored on the supplied CD-ROM. If you want to make use of
the preload waves that came with the unit when it left the factory, load waves from a USB
flash drive or your personal computer (p. 39).
• Waves can also be selected from the WAVE LIST of the quick menu.
• By holding down the [PAD CHECK] button and using the [-] [+] buttons you can select the
wave in steps of 10.
Adjusts the volume of the pad.
MEMO
You can also set the VOLUME from the top screen (p. 26).
Adjusts the stereo position (left/right balance) of the sound.
Pads for which the same number is specified here will belong to the same mute group. A
newly played pad will silence any previously sounding pad that belongs to the same mute
group; only the most recently played pad in the mute group will be heard.
Specify the same mute group for pads that should not be heard together.
* The pad indicator of all pads in the same mute group will light.
If this is "ON, " the wave's playback speed will change according to the performance tempo.
* Drastic changes in playback speed may affect the quality of the sound.
Explanation
Choose this for sounds used to play single notes, such as percussion sounds.
Choose this for phrases that have a tempo.
Choose this when you want the wave to sound repeatedly.
Specifies the number of times that the wave will be repeated.
If this is "ON, " the wave will continue repeating.
The wave will play each time you play the pad.
The wave will alternately play or stop each time you play the pad.
Set it to "ON" to change the volume according to playing velocity. When it is set to "OFF, " the
sound is produced at a constant volume.
Repeated plays will silence the previous sound.
Repeated plays will be layered on the previous sound.
Customizing a Kit
45