Note: When fitting the headlamp,
make sure that you reconnect the
electrical connector properly.
Note: When fitting the headlamp,
make sure that you fully engage the
headlamp in the lower fixing point.
Note: When fitting the headlamp,
place the front screw into the
headlamp unit before you install it.
Tighten the front screw first and then
the rear screw.
CHANGING A BULB
WARNINGS
Switch off the lights and the
ignition.
Let the bulb cool down before
removing it.
Have Xenon bulbs changed by
a trained technician. There is a
risk of electric shock.
CAUTIONS
Do not touch the glass of the
bulb.
Only fit bulbs of the correct
specification. See Bulb
specification chart (page 75).
Lighting
Headlamp
A
B
E72258
A
B
C
D
Remove the covers to gain access
to the headlamp and cornering lamp
bulbs.
Direction indicator
1. Remove the headlamp. See
Removing a headlamp (page
62).
2
E72259
63
C
D
Direction indicator
Headlamp main beam
Headlamp dipped beam
Cornering lamp
3