Table of Contents
Advertisement
If a low pressure warning message
is displayed in the information display,
check the tyre pressures as soon as
possible and inflate them to the
recommended pressure. See
Technical specifications (page
253). If this happens frequently, have
the cause determined and rectified
as soon as possible.
Checking the tyre
pressures
Tyre press.
0.0
bar
0.0
E74435
Note: If the tyre pressures are
greater than or equal to 3.3 bar (48
lbf/in²), you will see the + symbol
below the pressure value. The
system only measures pressure up
to 3.3 bar (48 lbf/in²). The + symbol
indicates that the tyre pressures may
be higher.
TECHNICAL SPECIFICATIONS
Tyre pressures (cold tyres)
Wheels and tyres
0.0
bar
0.0
253
From the Information menu, select
Tyre pressure. See Information
displays (page 88).
Setting the vehicle load
Tyres
Check
Low Load
High Load
E74434
Correct tyre pressure settings
depend on vehicle load. See
Technical specifications (page
253). The system can only detect low
pressure if you have entered the
current vehicle load.
From the Setup menu, select Tyres
then Select Low Load or High
Load and press OK. See
Information displays (page 88).
Advertisement
Table of Contents
