Table of Contents
Advertisement
GENERAL INFORMATION
CAUTIONS
Use only approved wheel and
tyre sizes. Using other sizes
could damage the vehicle and will
make the National Type Approval
invalid.
If you change the diameter of the
tyres from that fitted at the
factory, the speedometer may not
display the correct speed. Take the
vehicle to your dealer to have the
engine management system
reprogrammed.
A decal with tyre pressure data is
located in the driver s door opening
at the B-pillar.
Check and set the tyre pressure at
the ambient temperature in which
you are intending to drive the vehicle
and when the tyres are cold.
CHANGING A ROAD
WHEEL
Spare wheel
CAUTION
Use only approved wheel and
tyre sizes. Using other sizes
could damage the vehicle and will
make the National Type Approval
invalid.
Wheels and tyres
241
Locking wheel nuts
You can obtain a replacement locking
wheel nut key and replacement
locking wheel nuts from your Ford
Dealer using the reference number
certificate.
Vehicle jack
Your vehicle is not equipped with a
vehicle jack or a wheel brace.
Jacking and lifting points
E72908
CAUTION
Use only the specified jacking
points. If you use other positions,
you may damage the body, steering,
suspension, engine, braking system
or the fuel lines.
Note: Use a jack with a minimum
lifting capacity of 1.5 tonnes and a
lifting plate with a minimum diameter
of 80 millimetres (3.1 inches).
Indentations in the sills show the
location of the jacking points.
Advertisement
Table of Contents
