Table of Contents
Advertisement
E70529
Hold the brake or clutch pedal
depressed and press down the
switch.
The brake system warning lamp will
go off to confirm that the EPB has
been released.
Warning messages in the instrument cluster display
Text message
Release park
brake
Re-apply park
brake
For drive away
use park brake
Park brake
service required
Brakes
EPB
Brake
warning
system
lamp
warning
lamp
On
Flashing
On and
Flashing or
warning
off
chime
On or off
On
On or off
Flashing or
off
164
Moving off with a trailer
(vehicles with manual
transmission)
Depending on the gradient and the
weight of the trailer, the vehicle and
trailer may roll backwards slightly
when you move off on a slope. To
prevent this happening, deactivate
the Drive Away Release and release
the EPB manually as follows:
1. Pull up the switch and hold it in this
position.
2. Move off as normal and then
press down the switch when you
notice that the engine has
developed sufficient driving force.
Meaning
The EPB is still applied. Push
down the switch to release the
EPB manually.
The EPB is not applied. Pull up
the switch to apply the EPB
manually.
The Drive Away Release function
is temporarily disabled. Release
the EPB manually when moving
This indicates a malfunction of
the EPB. The EPB will still operate
but have the system checked by
an expert as soon as possible.
off.
Advertisement
Table of Contents
