Ford Galaxy 2007 Owner's Handbook Manual
  1. Manuals
  2. Brands
  3. Ford Manuals
  4. Automobile
  5. Galaxy 2007
  6. Owner's handbook manual

Ford Galaxy 2007 Owner's Handbook Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Feel the difference
FordGalaxy
FordS-MAX
Owner's handbook

Advertisement

Table of Contents
loading

Related Manuals for Ford Galaxy 2007

Summary of Contents for Ford Galaxy 2007

  • Page 1 Feel the difference FordGalaxy FordS-MAX Owner's handbook...
  • Page 2 This publication, or part thereof, may not be reproduced nor translated without our approval. Errors and omissions excepted. © Ford Motor Company 2007 All rights reserved. Part number: 7M2J-19A321-DA (CG3533en) 01/2007 20070129120050...

  • Page 3: Table Of Contents

    Table of contents Introduction Locks About this handbook......7 Locking and unlocking....36 Symbols glossary......7 Global opening and closing...39 Parts and accessories......7 Keyless entry........39 Quick start Engine immobiliser Quick start..........8 Principle of operation.....44 Coded keys........44 Child safety Arming the engine immobiliser..44 Child seats........19 Disarming the engine immobiliser........44 Booster cushions......20...
  • Page 4 Table of contents Autolamps........57 Air vents...........113 Front fog lamps.......57 Manual climate control....114 Rear fog lamps........57 Automatic climate control.....117 Headlamp levelling......58 Heated windows and mirrors..121 Hazard warning flashers....59 Auxiliary heater.......122 Adaptive front lighting system (AFS)..........59 Seats Direction indicators......61 Sitting in the correct position..127 Interior lamps........61 Manual seats........127 Removing a headlamp....62...
  • Page 5 Table of contents Starting the engine Hill launch assist (HLA) General information.......147 Principle of operation....168 Ignition switch.........147 Using HLA........168 Keyless starting......147 Steering wheel lock.......149 Active suspension Starting a petrol engine....150 Principle of operation.....171 Starting a diesel engine....151 Using active suspension....171 Diesel particulate filter (DPF)..151 Switching off the engine....152 Parking aid...
  • Page 6 Table of contents Towing Engine compartment overview - 2.5L Duratec-ST (VI5)....228 Towing a trailer......200 Engine compartment overview - Detachable tow ball.....200 1.8L Duratorq-TDCi (Kent) Retractable tow ball.....203 Diesel..........229 Engine compartment overview - 2.0L Duratorq-TDCi (DW) Driving hints Diesel..........230 Running-in........208 Engine oil check......231 Engine coolant check....232 Emergency Automatic transmission fluid...
  • Page 7 Table of contents Technical specifications....253 Navigation system commands.........286 Climate control commands..286 Vehicle identification Vehicle identification plate...256 Appendices Vehicle identification number (VIN)..........256 Type approvals......289 Engine number - 2.0L Duratec-HE Type approvals......295 (MI4)..........256 Engine number - 2.3L Duratec-HE (MI4)..........256 Engine number - 2.5L Duratec-ST (VI5)..........256 Engine number - 1.8L Duratorq-TDCi (Kent) Diesel..256...

  • Page 9: Introduction

    SYMBOLS GLOSSARY not guarantee that they are suitable for your vehicle. We recommend that you ask your Ford Dealer for advice Symbols in this handbook on parts and accessories suitable for your vehicle. WARNING...

  • Page 10: Quick Start

    Quick start QUICK START Instrument panel overview - LHD E74123 Lighting controls. See Lighting (page 56). Air vents. See Climate control (page 113). Direction indicators. See Lighting (page 56). Voice control and phone buttons. See separate handbook. Audio controls. See Steering wheel (page 49).
  • Page 11 Quick start Instrument cluster. See Instruments (page 83). Information display controls. See Information displays (page 88). Wiper lever. See Wipers and washers (page 51). Audio or navigation unit. See separate handbook. Stability control switch. See Stability control (page 166). Parking aid switch. See Parking aid (page 173). Hazard warning flasher switch.
  • Page 12 Quick start Instrument panel overview - RHD E75798 Heated windscreen and heated rear window switches. See Climate control (page 113). Storage compartment. See Convenience features (page 138). Hazard warning flasher switch. See Lighting (page 56). Passenger airbag deactivation warning lamp. See Occupant protection (page 25).
  • Page 13 Quick start Parking aid switch. See Parking aid (page 173). Audio or navigation unit. See separate handbook. Direction indicators. See Lighting (page 56). Voice control and phone buttons. See separate handbook. Audio controls. See Steering wheel (page 49). Instrument cluster. See Instruments (page 83). Information display controls.
  • Page 14 Quick start Keyless entry Locking the vehicle E87384 E78276 Passive locking and unlocking requires a valid passive key to be located within one of the three external detection ranges. Unlocking the vehicle E87435 Locking buttons are located on each of the front doors and the luggage compartment lid.
  • Page 15 Quick start Electric folding mirrors E71221 Release the locking lever to adjust E72623 the height of the steering wheel and Press the button to fold or unfold the its distance from the driver. mirrors. See Adjusting the steering See Electric exterior mirrors wheel (page 49).
  • Page 16 Quick start Information displays Direction indicators E70499 E70727 Use the arrow buttons to navigate Note: Tap the lever up or down to through the menus and press OK to make the direction indicators flash only three times. make a selection. Autowipers See Information displays (page 88).
  • Page 17 Quick start 1. Vehicles without keyless starting, insert the ignition key and turn it to position I or II. Vehicles with keyless starting, press the start button. 2. Adjust the seat and exterior mirrors to the desired position. 3. Press and hold for at least 3 seconds the desired pre-set button B.
  • Page 18 Quick start Cooling the interior quickly Rear seat air vents E71381 Defrosting and demisting the windscreen E71382 See Manual climate control (page 114). Automatic climate control E73131 Air flow through lower air vent Air flow through upper air vent E70304 Upper air vent See Automatic climate control Select position B to defrost or demist...
  • Page 19 Quick start Selecting reverse gear Electric parking brake (EPB) Vehicles with a 6-speed transmission Applying the EPB Vehicles with a petrol engine E70528 Releasing the EPB manually E75051 Vehicles with a diesel engine E70529 Hold the brake or clutch pedal depressed and press down the switch.
  • Page 20 Quick start See Electric parking brake (EPB) (page 161).

  • Page 21: Child Safety

    Note: Mandatory use of child restraints varies from country to country. A choice of ECE approved child restraints is available from your Ford Dealer. Ask for the child restraint that we recommend for your vehicle. Child restraints for different E68916...

  • Page 22: Booster Cushions

    Child safety Child safety seat WARNINGS Secure children that weigh more than 15 kilogrammes but are less than 150 centimetres tall in a booster seat or a booster cushion. Booster seat E68920 Secure children that weigh between 13 and 18 kilogrammes in a child safety seat in the rear seat.

  • Page 23: Child Seat Positioning

    Child safety Booster cushion CHILD SEAT POSITIONING WARNINGS When using a child restraint with a support leg on a second row seat, make sure the support leg rests securely on the lid of the underfloor storage compartment. Ensure that the foam spacer inside the storage compartment is correctly installed and that the lid is properly positioned on the storage compartment.
  • Page 24 Child safety Seating positions Mass group categories Up to 10 Up to 13 9 - 18 kg 15 - 25 22 - 36 Baby safety seat Child Booster seat or safety cushion seat Second row ISOfix seats Second row ISOfix C, D, E A, B, B1, classes*...

  • Page 25: Isofix Anchor Points

    Child safety Attaching a child seat with ISOFIX ANCHOR POINTS top tethers WARNING WARNING Use an anti-rotation device Do not attach a tether strap to when using the ISOFIX system. anything other than the correct We recommend the use of a top tether anchor point.

  • Page 26: Child Safety Locks

    Child safety CHILD SAFETY LOCKS WARNING You cannot open the doors from inside if you have put the child safety locks on. E73697 Lock Unlock...

  • Page 27: Occupant Protection

    Occupant protection Note: You will hear a loud bang and PRINCIPLE OF see a cloud of harmless powdery OPERATION residue if an airbag deploys. This is normal. Airbags Note: Only wipe airbag covers with WARNINGS a damp cloth. Do not modify the front of your The restraint system comprises: vehicle in any way.
  • Page 28 Occupant protection Driver and front passenger airbags E86311 The driver knee airbag will deploy during frontal collisions or collisions that are up to 30 degrees from the left or the right. The airbag will inflate within a few thousandths of a second E74302 and deflate on contact with the The driver and front passenger...
  • Page 29 Occupant protection Side airbags Curtain airbags E72658 E75004 Side airbags are fitted inside the Curtain airbags are fitted inside the seatback of the front seats. A label trim panels over the front and rear indicates that side airbags are fitted side windows.

  • Page 30: Fastening The Seat Belts

    Occupant protection Seat belts FASTENING THE SEAT BELTS WARNINGS Wear a seat belt and keep WARNING sufficient distance between yourself and the steering wheel. Only Insert the tongue into the buckle when you use the seat belt properly, until you hear a distinct click. can it hold you in a position to You have not fastened the seat belt achieve its optimum effect.
  • Page 31 Occupant protection Second row centre seat belt E74127 Note: The seat belt tongues are designed so that you can only insert E74125 them into the correct buckle. E74126...
  • Page 32 Occupant protection Third row seat belts The retractor for the rear centre seat belt is located in the roof. WARNING To fasten the seat belt: On the S-MAX, do not release 1. Pull it out steadily and engage the the third row seat belts from the smaller tongue in the black buckle floor lugs.

  • Page 33: Seat Belt Height Adjustment

    Occupant protection SEAT BELT HEIGHT ADJUSTMENT E73137 1. Press the spring hook (1) and unhook it downwards. 2. Let the belt retract and push the hook into the retainer on the trim panel until it engages with an E73135 audible click (2). To raise the height, grasp the D-ring Latching the belts to the floor and move the pivot up.

  • Page 34: Seat Belt Reminder

    Deactivating the seat belt pregnant abdomen. reminder You can have the seat belt reminder DISABLING THE deactivated by your Ford dealer. PASSENGER AIRBAG WARNING Make sure the passenger airbag is disabled when using a rearward facing child restraint on the...
  • Page 35 Occupant protection Disabling the passenger airbag E71312 Disabled Enabled E71313 Turn the switch to position A. Fitting the passenger airbag deactivation switch When you switch the ignition on, check that the passenger airbag WARNING deactivation warning lamp comes on. If you need to fit a child restraint Enabling the passenger on a seat protected by an airbag...

  • Page 36: Keys And Remote Controls

    Keys and remote controls The operating range between your USING THE KEY remote control and your vehicle varies depending on the Remote control with flip key environment. blade PROGRAMMING THE REMOTE CONTROL You can programme a maximum of eight remote controls to use with your vehicle (including any supplied with your vehicle).
  • Page 37 Keys and remote controls Remote control without a folding key blade E74384 2. Twist the screwdriver in the position shown to start separating the two halves of the remote control. E74386 1. Insert a screwdriver into the recess on the back of the key and remove the key blade.

  • Page 38: Locks

    Locks Double locking is a theft protection LOCKING AND feature that prevents someone from UNLOCKING opening the doors from the inside. You can only double lock the doors Central locking if they are all closed. You can only centrally lock the doors Locking and unlocking if they are all closed.
  • Page 39 Locks Locking and unlocking the Locking and unlocking the doors with the key doors with the remote control E87379 Unlock Lock Luggage compartment lid unlock Locking the doors with the remote control Press button B once. E71962 Double locking the doors with the remote control Unlock Lock...
  • Page 40 Locks Locking and unlocking the Closing the luggage doors from inside compartment lid Front doors E71960 A recessed grip is incorporated inside the luggage compartment lid to facilitate closing. Automatic relocking The doors will relock automatically if E71958 you do not open a door within 45 seconds of unlocking the doors with Lock all doors the remote control.

  • Page 41: Global Opening And Closing

    Locks GLOBAL OPENING AND CLOSING You can also operate the electric windows with the ignition off via the global opening and global closing function. Note: Global closing will only operate if you have set the memory correctly for each window. See Electric windows (page 76).
  • Page 42 Locks Passive key The passive entry system will not function if: The vehicle can be locked and • The passive key frequencies are unlocked with the passive key. The jammed. passive key can also be used as a • The passive key battery is flat. remote control.
  • Page 43 Locks Note: If locking from the luggage Unlocking the vehicle compartment lid, the passive key Note: If the vehicle remains locked must be within the luggage for longer than five days, the key free compartment lid detection range. system will enter an energy-saving Locking buttons are located on each mode.
  • Page 44 Locks Locking and unlocking the Unlocking only the driver's door doors with the key blade If the unlocking function is Type 1 reprogrammed so that only the driver s door is unlocked ( See Keys and remote controls (page 34). ), note the following: If the driver s door is the first door which is opened, the other doors and...
  • Page 45 Locks 2. Remove the key blade and insert it into the lock.

  • Page 46: Engine Immobiliser

    If you lose a key, you can obtain a replacement from your Ford Dealer. If possible, provide them with the key number from the tag provided with the original keys. You can also obtain additional keys from your Ford Dealer.

  • Page 47: Alarm

    Alarm The sensors act as a deterrent PRINCIPLE OF against unauthorised intrusion by OPERATION sensing any movement within the vehicle. Alarm system Battery back-up sounder Your vehicle may be equipped with one of the following alarm systems: The battery back-up sounder is an extra alarm system which will sound •...
  • Page 48 Alarm • If the interior sensors detect Ask on Exit movement within the vehicle. You can set the information display • On vehicles with a battery to ask you each time which level of back-up sounder, if someone guard you wish to set. disconnects the vehicle battery or If you select Ask on Exit, the the battery back-up sounder itself.

  • Page 49: Arming The Alarm

    Alarm ARMING THE ALARM Alarm All vehicles Full Guard To arm the alarm, lock the vehicle with the key or remote control. Reduced Ask on Exit DISARMING THE ALARM Vehicles without keyless entry Perimeter alarm E74509 Disarm and silence the alarm by 1.
  • Page 50 Alarm Perimeter alarm Disarm and silence the alarm by unlocking the doors and switching the ignition on, or unlocking the doors or the luggage compartment lid with the remote control. Category one alarm Disarm and silence the alarm by unlocking the doors and switching the ignition on within 12 seconds, or unlocking the doors or the tailgate with the remote control.

  • Page 51: Steering Wheel

    Steering wheel ADJUSTING THE AUDIO CONTROL STEERING WHEEL WARNING Never adjust the steering wheel when the vehicle is moving. E72288 Volume up Seek up Volume down Seek down Mode E71221 Mode Release the locking lever to adjust Press and hold the mode button to the height of the steering wheel and select the audio source.
  • Page 52 Steering wheel Seek Press a seek button to: • tune the radio to the next station up or down the frequency band • play the next or the previous CD track • fast forward or rewind the cassette tape. Press and hold a seek button to: •...

  • Page 53: Wipers And Washers

    Wipers and washers WINDSCREEN WIPERS AUTOWIPERS E76677 CAUTIONS E70696 Do not switch autowipers on in dry weather conditions. The rain Single wipe sensor is very sensitive and the wipers may operate if dirt, mist or flies Intermittent wipe hit the windscreen. Normal wipe Replace the wiper blades as High speed wipe...

  • Page 54: Rain Sensor

    Wipers and washers If you switch autowipers on, the WINDSCREEN WASHERS wipers will not cycle until water is detected on the windscreen. The rain WARNING sensor will then continuously Do not operate the windscreen measure the amount of water on the washers for more than 10 windscreen and adjust the speed of seconds or when the reservoir is...

  • Page 55: Headlamp Washers

    Wipers and washers Reverse gear wipe HEADLAMP WASHERS The rear window wiper will operate automatically when you select reverse gear if the wiper lever is in position B, C or D. Washer WARNING Do not operate the rear window washer for more than 10 seconds or when the reservoir is E70776 empty.

  • Page 56: Changing The Wiper Blades

    Wipers and washers Clean the wiper blade lips with water applied with a soft sponge. CHANGING THE WIPER BLADES Windscreen wiper blades CAUTIONS Set the windscreen wipers in the E75188 service position to change the Switch off the ignition and move the wiper blades.

  • Page 57: Technical Specifications

    Wipers and washers Note: Make sure that the wiper Lift the wiper arm. blade locks into place. 1. Position the wiper blade at right Install in the reverse order. angles to the wiper arm. 2. Press the retaining clip. Rear window wiper blades 3.

  • Page 58: Lighting

    Lighting One side LIGHTING CONTROL Lighting control positions E75505 Right-hand side Left-hand side E70718 Main and dipped beam Side and tail lamps Headlamps Parking lamps CAUTION Prolonged use of the parking lamps will discharge the battery. E70725 Switch off the ignition. Pull the lever fully towards the steering wheel to switch between Both sides...

  • Page 59: Autolamps

    Lighting Home safe lighting FRONT FOG LAMPS Switch off the ignition and pull the direction indicator lever fully towards the steering wheel to switch the headlamps on. The headlamps will go off automatically 30 seconds after you have closed the last door. AUTOLAMPS E70721 WARNING...

  • Page 60: Headlamp Levelling

    Lighting HEADLAMP LEVELLING Raised headlamp beams Lowered headlamp beams You can adjust the level of the headlamp beams according to the vehicle load. Note: Vehicles with Xenon headlamps are equipped with automatic headlamp levelling. E70722 Recommended headlamp levelling switch positions Load Load in Switch posi-...

  • Page 61: Hazard Warning Flashers

    Lighting Note: You can also operate the HAZARD WARNING hazard warning flashers when the FLASHERS ignition is off. Note: Depending on applicable laws and regulations in the country for which your vehicle was originally built, the hazard warning flashers will flash if you brake heavily.
  • Page 62 Lighting The AFS adjusts the headlamp A message will appear in the dipped beam depending on vehicle information display if the system direction and speed. It improves malfunctions. See Information visibility when you are driving at night messages (page 102). The and helps to reduce headlamp glare headlamps will move to a fixed for oncoming drivers.

  • Page 63: Direction Indicators

    Lighting If you set the switch to position B, the DIRECTION INDICATORS courtesy lamp will come on when you unlock or open a door or the tailgate. If you leave a door open with the ignition switch off, the courtesy lamp will go off automatically after some time to prevent the vehicle battery from discharging.

  • Page 64: Removing A Headlamp

    Lighting Vanity mirror lamps E72900 E72257 Note: When you remove the headlamp, make sure the front screw remains in the headlamp moulding. If you switch off the ignition, the vanity 2. Remove the screws. mirror lamps will go off automatically after a short time to prevent the vehicle battery from discharging.

  • Page 65: Changing A Bulb

    Lighting Note: When fitting the headlamp, Headlamp make sure that you reconnect the electrical connector properly. Note: When fitting the headlamp, make sure that you fully engage the headlamp in the lower fixing point. Note: When fitting the headlamp, place the front screw into the headlamp unit before you install it.
  • Page 66 Lighting 2. Turn the bulb holder anti-clockwise and remove it. 3. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. Note: When installing the bulb, pay attention to the guide tabs. 4. Install in the reverse order. Headlamp main beam E72260 1.
  • Page 67 Lighting Side repeater Approach lamp E72263 E72264 1. Remove the lamp. Note: Position the mirror glass as far inwards as possible. 1. Insert a screwdriver into the gap between the mirror housing and the mirror glass and release the metal retaining clip. E72291 2.
  • Page 68 Lighting Front fog lamp and side lamp (S-MAX) E72266 E74542 1. Remove the trim. Note: You cannot separate the fog lamp bulb from the bulb holder. 4. Disconnect the fog lamp electrical connector. 5. Turn the fog lamp bulb holder anti-clockwise and remove it.
  • Page 69 Lighting Front fog lamp and side 5. Turn the side lamp bulb holder lamp (Galaxy) anti-clockwise and remove it. 6. Remove the side lamp bulb. 7. Install in the reverse order. Rear lamp (S-MAX) Direction indicator and brake and tail lamp E72267 E74078 1.
  • Page 70 Lighting Reversing lamp, fog lamp and tail lamp E74079 3. Remove the lamp. E72271 4. Disconnect the electrical connector. 1. Remove the trim panel. E74076 2. Remove the wing nuts using a E74080 coin. 3. Remove the lamp. 5. Remove the screw. 4.
  • Page 71 Lighting E74077 E72791 5. Remove the screw. 2. Remove the wing nuts. 6. Remove the bulb holder. 7. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. 8. Install in the reverse order. Rear lamp (Galaxy) Direction indicator, brake lamp and tail lamp E72792...
  • Page 72 Lighting E72795 2. Remove the wing nuts using a coin. E72793 3. Remove the lamp. 5. Remove the screw. 4. Disconnect the electrical 6. Remove the bulb holder. connector. 7. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it.
  • Page 73 Lighting E72798 E75460 6. Remove the screws. 2. Release the spring clips using a screwdriver. 7. Remove the bulb holder. 8. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. 9. Install in the reverse order. Central high mounted brake lamp (S-MAX) E72790...
  • Page 74 Lighting Central high mounted brake Note: Make sure that the lamp clips lamp (Galaxy) into place. 5. Install in the reverse order. Number plate lamp E75457 E72789 1. Remove the trim panel. 1. Release the spring clip using a small screwdriver. 2.
  • Page 75 Lighting Interior lamp (vehicles without 1. Carefully prise out the lens using interior sensors) a flat-bladed screwdriver. 2. Remove the lens. 3. Remove the bulb. 4. Install in the reverse order. Reading lamp (vehicles without interior sensors) E72788 1. Carefully prise out the lens using a flat-bladed screwdriver.
  • Page 76 Lighting Reading lamp (vehicles with 1. Carefully prise out the lamp using interior sensors) a flat-bladed screwdriver. 2. Remove the bulb. 3. Install in the reverse order. Luggage compartment lamp E72786 1. Carefully prise out the lamp using a flat-bladed screwdriver. 2.

  • Page 77: Bulb Specification Chart

    Lighting BULB SPECIFICATION CHART Lamp Specification Power (watt) Front direction indicator PY21W Headlamp main beam Headlamp dipped beam Cornering lamp Side repeater WY5W Approach lamp Front fog lamp (S-MAX) Front fog lamp (Galaxy) Side lamp Rear direction indicator PY21W Brake and tail lamp (S-MAX) P21/5W 21/5 Brake lamp (Galaxy)

  • Page 78: Windows And Mirrors

    Windows and mirrors Note: Global closing will only operate ELECTRIC WINDOWS if you have set the memory correctly for each window. WARNING Driver s door switches Do not operate the electric windows unless they are free You can operate all the windows with from obstruction.
  • Page 79 Windows and mirrors Front and rear passengers door switches E70849 E70850 A switch in the driver s door disables Close the rear electric window switches. Open The light in the switch comes on and the lights in the rear window switches Opening and closing the go off when the rear windows are windows automatically...
  • Page 80 Windows and mirrors Overriding the anti-trap 1. Lift the switch until the window is function fully closed. Hold the switch lifted for one more second. CAUTION 2. Release the switch and lift it again, While you close the window for two or three times, for one more the third time, the anti-trap second.

  • Page 81: Exterior Mirrors

    Windows and mirrors Make sure that you fully engage the EXTERIOR MIRRORS mirror in its support when returning it to its original position. Convex outside mirrors ELECTRIC EXTERIOR MIRRORS E71042 WARNING Do not overestimate the distance of the objects that you see in the convex mirror.
  • Page 82 Windows and mirrors Mirror tilting positions E72623 Press the button to fold or unfold the E70847 mirrors. If you press the switch again while the mirrors are moving, they will stop right and reverse the direction of down movement. left Note: When the mirrors are operated often during a short period The electric exterior mirrors are fitted...

  • Page 83: Interior Mirror

    Windows and mirrors Note: You can disable this feature 4. Adjust the mirror to the required by leaving the electric exterior mirror dipped position. See Electric selector switch in position B. exterior mirrors (page 79). 5. Press and hold the desired The exterior mirrors will return to the pre-set button until a single chime original position:...

  • Page 84: Rear Quarter Windows

    Windows and mirrors REAR QUARTER WINDOWS Galaxy E72127 Close Open E72126 To open, pull the lever, fold out the window and press the lever to engage it in its catch. When closing, ensure that the lever is securely engaged in its catch. Electric rear quarter windows Switch on the ignition to operate the...

  • Page 85: Instruments

    Instruments GAUGES E72984 Tachometer Engine coolant temperature gauge Fuel gauge Speedometer CAUTION Engine coolant temperature Do not restart the engine until the gauge cause of overheating has been Shows the temperature of the engine resolved. coolant. At normal operating temperature, the needle will remain in the centre section.

  • Page 86: Warning Lamps And Indicators

    Instruments ABS warning lamp If the needle moves towards 120°C, the engine is overheating. Stop the The ABS warning lamp will engine, switch the ignition off and flash when the system is determine the cause once the operating. If it comes on engine has cooled down.
  • Page 87 Instruments Electric parking brake If the brake system warning lamp comes on with the ABS warning lamp (EPB) warning lamp or the stability control warning lamp, The EPB warning lamp will this indicates a malfunction. Stop your come on when an EPB vehicle as soon as it is safe to do so warning message is and have this checked before...
  • Page 88 Instruments Headlamp indicator Message indicator The headlamp indicator will The message indicator will come on when you switch come on when a new the headlamp dipped beam message is stored in the or the side and tail lamps on. information display. See Information displays (page 88).

  • Page 89: Audible Warnings And Indicators

    Instruments Stability control (ESP) 1. Press the right arrow button on warning lamp the steering wheel to enter the main menu. Note: If the ESP system 2. Highlight Setup with the up and malfunctions, it will switch off down arrow buttons and press automatically.

  • Page 90: Information Displays

    Information displays Press the up and down arrow GENERAL INFORMATION buttons: WARNING • to scroll through the trip computer displays Do not operate the information • to scroll through and highlight the display controls when the options within a menu. vehicle is moving.
  • Page 91 Information displays Function Type 1 Type 2 Type 3 Clock setup Display settings Park heater setup Navigation control CD control CD changer control Radio control Phone control Auxiliary input control Use the up and down arrow buttons Type 1 to scroll through the trip computer displays.
  • Page 92 Information displays Menu structure Reset trip Tripodometer Avg. fuel Avg. speed All values Information Messages Clock Set clock 24 Hour mode 12 Hour mode E87751 Use the up and down arrow buttons Type 2 to scroll through the trip computer displays.
  • Page 93 Information displays Menu structure Reset Trip Trip Odo Avg. fuel Avg. speed Messages Information Tyre Press. Set Clock Clock 24 Hour Mode 12 Hour Mode Display Help Screen Setup Configure Radio Info Phone Info NAV info Always off On guidance Always on English Language...
  • Page 94 Information displays Low Fuel Chimes General info. General warn. Home light ACC warning FA warning Early Sensitivity Forw. Alert Normal Late Warn Audible Hill Launch Auto Manual Check Tyre Pressure Low load High load Full guard Alarm Reduced Ask on exit Time 1 Set Time Aux.
  • Page 95 Information displays Type 3 Navigation CD changer Radio E88048 Phone Use the controls to scroll through the menu displays. Trip computer Note: After a short period of time, the display will enter a screen saver mode. To access the menus from Settings here, press the left arrow button.
  • Page 96 Information displays Menu structure Navigation Home Destinations Destinat. mem. Destinations Destinat. A-Z Destinations Last destinat. Cancel guidan. Folder / Tracks Folder / Tracks CD changer CD 1 CD 2 Folder / Tracks CD 3 Folder / Tracks CD 4 Folder / Tracks CD 5 Folder / Tracks CD 6...
  • Page 97 Information displays Trip computer Distance to empty Average fuel Average speed Reset selected element Reset trip odometer Messages Information Settings Tyre Pressure Set Clock Clock 24-hour mode 12-hour mode Colour themes Display Setup Configure Help Screen NAV info Always off On guidance Always on Language...
  • Page 98 Information displays Low Fuel Chimes General info. General warn. Home light ACC warning FA warning Early Sensitivity Forw Alert Normal Late Warn Audible Hill Launch Auto Manual Check Tyre Pressure Low load High load Full guard Alarm Reduced Ask on exit Aux Heater E87756...

  • Page 99: Trip Computer

    Information displays Set Time Time 1 Park heater Monday Tuesday Wednesday Thursday Friday Saturday Sunday Time 2 Set Time Monday Tuesday Wednesday Thursday Friday Saturday Sunday Once Active now Auxiliary input E88067 Distance to empty TRIP COMPUTER Indicates the approximate distance the vehicle will travel on the fuel Odometer remaining in the tank.
  • Page 100 Information displays Average speed Average fuel Indicates the average speed calculated since the function was last reset. Average speed Outside air temperature Outside air Shows the outside air temperature. Reset Trip Type 1 and 2 Dist. to empty 10:20 E74441 Press the up and down arrow buttons on the steering wheel to Average Fuel...

  • Page 101: Personalised Settings

    Information displays Type 3 If the radio, navigation or telephone is operating, information relating to this system will appear in the display. To select which information should be shown in the display: Type 1 and 2 1. Press the right arrow button on the steering wheel to enter the main menu.
  • Page 102 Information displays 5. To toggle the Help screen and 6. Highlight the desired setting and NAV Info on and off, highlight the press the OK button. option and press the OK button. 7. Press the left arrow button to exit the menu.
  • Page 103 Information displays 3. Highlight Display and press the 2. Highlight Setup with the up and right arrow button. down arrow buttons and press the right arrow button. 4. Highlight Language and press the right arrow button. 3. Highlight Display and press the right arrow button.

  • Page 104: Information Messages

    Information displays Have the system checked INFORMATION at the next service. MESSAGES Have the system checked as soon as possible. Stop your vehicle as soon as it is safe to do so. Viewing current messages Type 1 and 2 1. Press the right arrow button to E70499 enter the main menu.
  • Page 105 Information displays Active suspension Message Message Meaning warning lamp IVDC malfunction amber The active suspension has malfunctioned. Have this checked as soon as possible. See Active suspension (page 171). IVDC comfort The active suspension is set to the comfort setting. IVDC normal The active suspension is set to the normal setting.
  • Page 106 Information displays Battery and charging system Message Message Meaning warning lamp Overvoltage Stop The charging system voltage is above its safely! normal operating range. Stop your vehicle as soon as it is safe to do so, stop the Power system engine and switch off the ignition.
  • Page 107 Information displays Message Message Meaning warning lamp ACC malfunction amber The ACC has malfunctioned. Have this checked as soon as possible. Clean radar amber There may be something blocking the sensor radar sensor. Clear any dirt, snow, water or other objects from the front grille area. Forward Alert amber Forward alert has malfunctioned.
  • Page 108 Information displays Engine immobiliser Message Message Meaning warning lamp Immobiliser amber The engine immobiliser is on. See Engine active immobiliser (page 44). Hill launch assist (HLA) Message Message Meaning warning lamp Hill Launch not amber HLA has malfunctioned. Have this checked available as soon as possible.
  • Page 109 Information displays Message Message Meaning warning lamp Car operative amber The engine is still running. Switch the igni- Press STOP tion off. See Keyless starting (page 147). Key outside car amber A valid passive key has not been detected inside the vehicle. Key battery low Amber Change the battery as soon as possible.
  • Page 110 Information displays Message Message Meaning warning lamp Trailer turnl.: Bulb One or both of the direction indicator bulbs fault on your trailer have blown. Check the direction indicator bulbs on your trailer. Maintenance Message Message Meaning warning lamp Engine malfunc- The engine system has malfunctioned.
  • Page 111 Information displays Parking brake Message Message Meaning warning lamp Park brake The parking brake has malfunctioned. Have malfunction this checked as soon as possible. Release park Release the parking brake. See Parking brake brake (page 161). Re-Apply park Apply the parking brake again. See brake Parking brake (page 161).
  • Page 112 Information displays Stability control (ESP) Message Message Meaning warning lamp ESP off Stability control is off. ESP malfunction Stability control has malfunctioned. Have this checked as soon as possible. Transmission Message Message Meaning warning lamp Transmission amber The transmission is over heating. Have this overtemperatur checked as soon as possible.
  • Page 113 Information displays Message Message Meaning warning lamp Tyre monitor amber You have installed a temporary spare malfunction wheel. Install a correctly inflated full size wheel with a sensor as soon as possible. When a malfunction occurs, the system may not be able to detect or signal low tyre pressure.
  • Page 114 Information displays Voice control Message Message Meaning warning lamp Voice control Voice control is on. Please speak Voice control Not Check voice control. recognised Voice control Not Voice control is not allowed in this mode. allowed...

  • Page 115: Climate Control

    Climate control Air is directed through the evaporator PRINCIPLE OF where it is cooled. Humidity is OPERATION extracted from the air to help keep the windows free of mist. The Outside air resulting condensation is directed to the outside of the vehicle and it is Keep the air intakes forward of the therefore normal if you see a small windscreen free from obstruction...

  • Page 116: Manual Climate Control

    Climate control Second row air vents Third row air vents E73132 MANUAL CLIMATE CONTROL Blower E75470 E73131 Note: If you switch the blower off, Air flow through lower air the windscreen may mist up. vent Air flow through upper air vent Upper air vent Use the upper air vents to defrost or...
  • Page 117 Climate control Temperature control You can set the air distribution control to any position between the symbols. A small amount of air is always directed towards the windscreen. Recirculated air Press the button to toggle between outside air and recirculated air. E75471 Heating the interior quickly Blue...
  • Page 118 Climate control Air conditioning Cooling the interior quickly Switching the air conditioning on and off Press the A/C switch to turn the air conditioning on and off. The indicator in the switch will come on when the air conditioning is operating. E71381 If you turn the blower off, the air conditioning will turn off.

  • Page 119: Automatic Climate Control

    Climate control You can switch the air conditioning Reducing interior air humidity and recirculated air on and off while the air distribution control is set to position A. If necessary, switch the heated windows on. See Heated windows and mirrors (page 121). Note: To defrost or demist the rear side windows, set the second row air vents to the defrosting and...
  • Page 120 You can now long as the engine is cold. adjust the driver and passenger side Note: A description of the Ford temperatures independently of each DVD-Navigation System in another. The temperature settings...
  • Page 121 Climate control Note: If you set a temperature of greater than 4°C, the temperature on the other side will be adjusted so that the difference remains 4°C. Note: If you set one of the sides to HI or LO, both sides will be set to HI E70308 or LO.
  • Page 122 Climate control Switching off the automatic To return to auto mode, press the AUTO button. climate control Note: To defrost or demist the rear side windows, set the second row air vents to defrosting and demisting. See Air vents (page 113). Switching the air conditioning on and off Press the A/C button to switch the...

  • Page 123: Heated Windows And Mirrors

    Climate control Rear air conditioning Rear temperature (Triple-zone automatic Note: You can set a lower climate control) temperature than for the front, but not a higher temperature than the Note: The rear air conditioning is a average of the two front temperature cooling system only.

  • Page 124: Auxiliary Heater

    Climate control Heated windscreen AUXILIARY HEATER Parking heater WARNING Press the switch to switch the heated The parking heater must not be windscreen on. The indicator in the operated at filling stations, near switch will come on when the heated sources of combustible vapours or windscreen is on.
  • Page 125 Climate control Note: When the parking heater is activated, exhaust fumes may come from under the sides of the vehicle. This is normal. Note: On vehicles with a manual heating, ventilation and air conditioning system, the heating of the vehicle interior is dependent on the temperature, air distribution and blower control settings.
  • Page 126 Climate control • The functions Program 1 and 4. Continue in the same way to Program 2 allow you to select all the days on which the programme up to two heating heater should warm up the times for each day of the week. vehicle.
  • Page 127 Climate control Fuel operated heater Programming the function One-Time (depending on country) 1. Highlight One-Time and press The fuel operated heater aids in the right arrow button. warming the engine and the interior compartment on vehicles with a 2. Press the OK button and the petrol or diesel engine.
  • Page 128 Climate control 3. Highlight Aux. Heater and press the OK button to toggle the heater on and off. A cross appears in the box when the heater is activated. 4. Press the left arrow button to exit the menu. To return to the trip computer display directly, hold the left arrow button pressed.

  • Page 129: Seats

    Seats • keep sufficient distance between SITTING IN THE yourself and the steering wheel. CORRECT POSITION We recommend a minimum of 254 millimetres (10 inches) between your breastbone and the airbag cover. • hold the steering wheel with your arms slightly bent. •...

  • Page 130: Electric Seats

    Seats Adjusting the angle of the WARNING seatback Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch. Adjusting the lumbar support E70731 ELECTRIC SEATS 2-way electric seat E70729 Adjusting the height of the driver s seat E70733...
  • Page 131 Seats 8-way electric seat E70734...

  • Page 132: Head Restraints

    Seats HEAD RESTRAINTS Adjusting the head restraint WARNINGS Raise the rear head restraint when the rear seat is occupied by a passenger. When using a forward facing child restraint on a rear seat, always remove the head restraint from that seat. E72593 Adjust the head restraint so that the Adjust the angle of a four-way front...

  • Page 133: Rear Seats

    Seats Adjusting the seatback REAR SEATS Second row seats Moving the seats backwards and forwards E72645 1. To recline the seatback, pull the lever on the outboard seats or the strap on the centre seat and lean back against the seatback until it E72644 reaches the desired position.
  • Page 134 Seats Easy entry position (vehicles 1. Pull the lever once. Fold the with third row seats only) seatback forwards into the position shown and slide the complete seat forwards. When exiting the vehicle from the third row seats, pull the loop on the rear of the second row seat.
  • Page 135 Seats 5. On the centre seat, pull the loop between the seat cushion and the seatback and fold down the seatback. 6. To engage the seatbacks in the folded position, pull the lever or loop again and push the seatback firmly down until it latches into position.
  • Page 136 Seats Adjusting the seatback (Galaxy) E72707 E75381 1. To recline the seatback, pull the strap and lean back against the seatback until it reaches the desired position. 2. To raise the seatback, pull the strap and let the seatback return to the upright position.

  • Page 137: Heated Seats

    Seats 4. To return the seat to the seating 1. Turn the retainers on the rear of position, grasp the grip and pull the third row seatbacks the seatback upwards and then anticlockwise through 90 degrees rearwards. to release the carpeted cover. 5.

  • Page 138: Ventilated Seats

    Seats When no light is illuminated, the heating is switched off. Note: The settings are stored when you switch off the ignition. VENTILATED SEATS CAUTION Ventilating with the engine off will drain the battery. E70601 The heated seats will operate when the ignition switch is in position II.

  • Page 139: Front Seat Armrest

    Seats FRONT SEAT ARMREST E70602 Adjust the ventilated seats using the switches on the centre console. Press the + button repeatedly to raise E70732 the temperature or the – button repeatedly to lower the temperature. Lift the armrest past the vertical The number of illuminated lights position and then fully lower it.

  • Page 140: Convenience Features

    Convenience features Roof (Galaxy) SUN VISORS E74808 E72973 Roof (S-Max) SUN BLINDS Side windows E74807 To release the blind, press the button. E74809 Pull the blind up and attach it to the hooks (A).

  • Page 141: Instrument Lighting Dimmer

    Convenience features 3. Press OK to select hours and use INSTRUMENT LIGHTING the up and down buttons to DIMMER change the value. 4. Press the right and left buttons to select minutes, day, month or year and use the up and down buttons to change the value.

  • Page 142: Ashtray

    You can use the auxiliary power socket to power 12 volt appliances that have a maximum current rating of 15 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets.

  • Page 143: Glove Box

    Convenience features E72975 E70885 To shut off the air flow, turn the valve in the glove box. CENTRE CONSOLE E72976 E73704 E72630 GLOVE BOX Cooled glove box You can cool the glove box using air from the air conditioning system.

  • Page 144: Storage Compartments

    Convenience features E72905 STORAGE COMPARTMENTS Front storage compartments WARNING Do not drive with the storage compartment lid open. Make sure that you secure the lid before setting off. E72905 CAUTION Do not keep heat-sensitive items and liquids in the storage compartment.
  • Page 145 Convenience features Under seat storage compartment E73067 Rear storage compartment E72981 1. Lift the lid. 2. Slide the storage compartment forwards. Overhead storage compartments WARNINGS Do not place heavy objects in the overhead storage compartments. Do not drive with the overhead E72982 storage compartments open.

  • Page 146: Map Pockets

    Convenience features MAP POCKETS GLASSES HOLDER E75193 MEMORY FUNCTION E74686 WARNINGS SEAT BACK TRAYS Before activating the seat memory, make sure that the WARNING area immediately surrounding the Do not use the trays when the seat is clear of obstructions and that vehicle is moving.
  • Page 147 Convenience features Active setting 1. Turn the ignition on. 2. Adjust the seat and exterior mirrors to the desired position. 3. Press and hold the desired pre-set button B until a single chime sounds to confirm. Easy entry easy exit To allow the driver to enter and exit the vehicle with ease, the driver's E86768...

  • Page 148: Childminder Mirror

    Convenience features Passive recall AUXILIARY INPUT (AUX IN) SOCKET Note: If easy entry easy exit is enabled, the driver seat will move to the entry and exit position. To disable this function, ask your Dealer. Note: If more than one passive keys are in range, the memory function will move to the settings of the first key stored.

  • Page 149: Starting The Engine

    Starting the engine 0 The ignition is off. GENERAL INFORMATION I The ignition and all main electrical General points on starting circuits are disabled. Note: Do not leave the ignition key If the battery has been disconnected the vehicle may exhibit some unusual in this position for too long to avoid discharging the battery.
  • Page 150 Starting the engine Starting with manual transmission CAUTION Release the start button as soon as the engine starts. Note: Releasing the start button or the clutch pedal during engine start will stop the engine cranking and return to ignition on. 1.

  • Page 151: Steering Wheel Lock

    Starting the engine Type 1 E85767 2. Insert the key into the key holder. E87382 3. With the key in this position you 1. Hold the key next to the steering can use the start button to switch column shroud exactly as shown. the ignition on and start your 2.

  • Page 152: Starting A Petrol Engine

    Starting the engine If the engine does not start after STARTING A PETROL three attempts, wait 10 seconds and ENGINE follow the Flooded engine procedure. Note: You can only operate the If you have difficulty starting the starter for a maximum of 30 seconds engine when the temperature is at a time.

  • Page 153: Starting A Diesel Engine

    Starting the engine If the engine is cold then the idle 2. Start the engine. speed will automatically be increased Vehicles with an automatic in order to heat the catalytic transmission converter as quickly as possible. This ensures that vehicle emissions are 1.

  • Page 154: Switching Off The Engine

    Starting the engine If you drive only short distances or your journeys contain frequent stopping and starting, you must initiate the regeneration process every 500-800 kilometres (300-500 miles). To do this, drive your vehicle at 80 km/h (50 mph) for 40 kilometres (25 miles) in the lowest possible gear whenever it is safe to do so.

  • Page 155: Fuel And Refuelling

    Fuel and refuelling SAFETY PRECAUTIONS WARNING Do not mix diesel with oil, petrol WARNINGS or other liquids. This could cause To avoid fuel spillage that could a chemical reaction. be hazardous to other road users, always stop refuelling after the CAUTION fuel nozzle stops the second time.

  • Page 156: Fuel Filler Flap

    E73225 conditioning usage, the accessories Press the flap to open it. Open the fitted and towing etc. Your Ford flap fully until it engages. dealer can give you advice on improving your fuel consumption. Turn the fuel filler cap anticlockwise.
  • Page 157 Fuel and refuelling S-MAX Fuel consumption figures Extra- CO2 emis- Urban Combined urban sions Variant l/100 km l/100 km l/100 km g/km (mpg) (mpg) (mpg) 2.0L Duratec-HE 11.0 (25.7) 6.4 (44.1) 8.1 (34.9) 2.5L Duratec 13.3 (21.2) 7.1 (39.8) 9.4 (30.1) 1.8L Duratorq-TDCi 7.9 (35.8) 5.2 (54.3)

  • Page 158: Transmission

    Transmission Vehicles with a 6-speed MANUAL TRANSMISSION transmission (2.5L Duratec-ST engine) All vehicles Selecting reverse gear CAUTIONS Do not engage reverse gear when the vehicle is moving. This can cause damage to the transmission. Do not apply any undue lateral force to the gear lever when changing from 5th to 4th gear.

  • Page 159: Automatic Transmission

    Transmission The selector lever position will be AUTOMATIC shown in the information display. TRANSMISSION Park Selector lever positions WARNINGS Select park only when your vehicle is stationary. Apply the parking brake and select park before leaving your vehicle. Make sure that the selector lever is latched in position.
  • Page 160 Transmission Manual shifting 2. Release the brake pedal and press the accelerator pedal. Stopping 1. Release the accelerator pedal and press the brake pedal. 2. Apply the parking brake. Kickdown Press the accelerator pedal fully with the selector lever in the drive position to select the next highest gear for optimum performance.
  • Page 161 Transmission E81705 1. Insert a flat-bladed screwdriver into the slot. 2. Turn the screwdriver through 90 degrees. 3. Push downwards on the screwdriver to detach the gaiter frame from the trim panel. 4. Push downwards on the gaiter frame to release the lever and move the selector lever from the park position.

  • Page 162: Brakes

    Brakes Wet brake discs result in reduced PRINCIPLE OF braking efficiency. Dab the brake OPERATION pedal when driving from a car wash to remove the film of water. Dual circuit braking system WARNING The ABS does not relieve you of your responsibility to drive with due care and attention.

  • Page 163: Parking Brake

    Brakes Note: Do not press the release The ABS will not eliminate the dangers inherent when: button when you apply the parking brake. • you drive too close to the vehicle in front of you. 1. Press the brake pedal firmly. •...
  • Page 164 Brakes To apply the EPB Preventing the automatic application WARNINGS Take care not to leave the vehicle with the EPB not applied. Remember that if you press down the switch while removing the key from the ignition, the EPB will not be applied.
  • Page 165 Brakes To release the EPB Application of the EPB when the vehicle is moving Automatic release - Drive WARNING Away Release (DAR) With the exception of Note: The engine must be running emergency conditions (e.g. the and accelerator pedal must be brake pedal does not work or is pressed before the Drive Away blocked), do not apply the EPB while...
  • Page 166 Brakes Moving off with a trailer (vehicles with manual transmission) Depending on the gradient and the weight of the trailer, the vehicle and trailer may roll backwards slightly when you move off on a slope. To prevent this happening, deactivate the Drive Away Release and release the EPB manually as follows: E70529...
  • Page 167 Brakes Text message Brake Meaning warning system lamp warning lamp Park brake Flashing This indicates a serious malfunc- malfunction tion of the EPB. The EPB will not operate. Have the system checked by an expert as soon as possible. Cut in the power supply WARNING You will not be able to apply or release the EPB if there is a cut...

  • Page 168: Stability Control

    Stability control The system also provides an PRINCIPLE OF enhanced traction control function OPERATION by reducing engine torque if the wheels spin when you accelerate. Electronic stability This improves your ability to pull away programme (ESP) on slippery roads or loose surfaces, and improves comfort by limiting WARNING wheel spin in hairpin bends.

  • Page 169: Using Stability Control

    Stability control USING STABILITY CONTROL E71225 Press and hold the ESP switch for one second. The ESP warning lamp will come on and OFF in the switch will illuminate. A message will also appear in the instrument cluster display. See Information messages (page 102).

  • Page 170: Hill Launch Assist (Hla)

    Hill launch assist (HLA) To set the HLA mode: PRINCIPLE OF OPERATION The Hill Launch Assist (HLA) makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake. When the HLA is active, the vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal.
  • Page 171 Hill launch assist (HLA) 4. Highlight the desired setting and • On vehicles with manual press the OK button to confirm transmission, the clutch pedal is the setting. If Off is selected, the pressed. HLA is switched off and cannot •...
  • Page 172 Hill launch assist (HLA) 3. When you remove your foot from the brake pedal, the vehicle will remain on the slope without rolling away for approximately two to three seconds. 4. Pull away using the accelerator and clutch pedal. The brakes will be released automatically.

  • Page 173: Active Suspension

    The dynamic instrument cluster display for a few behaviour of the vehicle in this setting seconds. You can change the setting is similar to the typical Ford while driving. passenger car performance.
  • Page 174 Active suspension System malfunction The active suspension system will switch off automatically if it malfunctions. The message warning lamp will come on and you will see a warning message in the message centre. See Information messages (page 102). The suspension will be set to a fail-safe condition that will enable you to continue driving but you will not be able to change the suspension...

  • Page 175: Parking Aid

    Parking aid PRINCIPLE OF USING THE PARKING AID OPERATION Note: Keep the sensors free from dirt, ice and snow. Do not clean with WARNING sharp objects. The parking aid does not relieve Switching the parking aid you of your responsibility to on and off drive with due care and attention.
  • Page 176 Parking aid Manoeuvring with the You will hear an intermittent tone at parking aid a distance of up to 180 centimetres between the obstacle and rear bumper, 80 centimetres between the obstacle and front bumper and 60 centimetres to the side. Decreasing the distance accelerates the intermittent tone.

  • Page 177: Cruise Control

    Cruise control Setting a speed PRINCIPLE OF OPERATION Cruise control allows you to control your speed using the switches on the steering wheel. You can use cruise control when you exceed 30 km/h (20 mph). USING CRUISE CONTROL E70615 Switching cruise control on Press the SET+ switch or the SET- switch to store and maintain your current speed.
  • Page 178 Cruise control Cancelling the set speed Switching cruise control off E70614 E70613 Press the brake pedal or the CAN Press the OFF switch. The system switch. The system will no longer will not retain the speed that you control your speed. The cruise previously set.

  • Page 179: Adaptive Cruise Control (Acc)

    The radar sensor is mounted behind WARNINGS the front grille, immediately to the Adaptive cruise control is not a right of the Ford badge (when viewed collision warning or avoidance from the front of the vehicle). system. The separate forward alert...
  • Page 180 Adaptive cruise control (ACC) • Keep the front of the vehicle free • When driving on a different line to from dirt, metal badges or objects, the vehicle in front (A). including vehicle front protectors • With vehicles that edge into your and additional lights which may lane that can only be detected prevent the sensor from...

  • Page 181: Using Acc

    Adaptive cruise control (ACC) WARNING Forward alert on/off You must take immediate action ACC gap increase once alerted, as the ACC ACC gap decrease braking will not be sufficient to keep a safe distance to the vehicle in front. Switching ACC on USING ACC Press the ACC ON/OFF (A) switch.
  • Page 182 Adaptive cruise control (ACC) Changing the set speed If a vehicle is detected by the sensor, the display will show another vehicle Press the SET+ switch or the SET- above the horizontal bars: switch to accelerate or decelerate. Note: If ACC does not react to these changes the reason may be that the gap interval to the vehicle in front prevents an increase in speed.

  • Page 183: Forward Alert Function

    Adaptive cruise control (ACC) In the event of automatic deactivation CAUTION a signal will sound and the message Use the appropriate gap setting ACC cancel is shown in the display. in accordance with local traffic You must then intervene and adapt regulations.
  • Page 184 Adaptive cruise control (ACC) Note: You can switch off the • You are alerted to a potential collision so you may brake earlier warning chimes by using the than normal. information display settings. • Brake support is activated to The forward alert system does not enable full braking effectiveness.
  • Page 185 Adaptive cruise control (ACC) Switching forward alert on/off E82310 Press the Forward alert on/off switch (C). The indicator light will come on in the instrument cluster. Adjusting the warning sensitivity You may adjust the Forward alert warning sensitivity through the information display menus.

  • Page 186: Load Carrying

    Load carrying GENERAL INFORMATION WARNINGS Do not drive with the tailgate or WARNINGS rear door open. Exhaust fumes may enter the vehicle. Use load securing straps to an approved standard, e.g. DIN. Do not exceed the maximum front and rear axle loads for your Make sure that you secure all vehicle.

  • Page 187: Luggage Anchor Points

    Load carrying LUGGAGE ANCHOR POINTS Galaxy E75393...
  • Page 188 Load carrying S-MAX E75394 Vehicles without third row seats. Raise the carpet to gain access to the anchor points. Vehicles with third row seats...

  • Page 189: Sliding Loadspace Floor

    Load carrying SLIDING LOADSPACE FLOOR WARNING Do not slide the loadspace floor rearwards when the vehicle is standing on an incline of 15 degrees or more and facing uphill. CAUTION The maximum permissible E74811 weight on the sliding loadspace floor is 200 kg. To slide it out fully, press the unlocking handle again and slide it The maximum permissible weight on...

  • Page 190: Rear Under Floor Storage

    Load carrying 3. Push the floor forwards until it engages at the front (2). 4. Release the support leg from the clip on the underside of the floor. 5. Insert the end into the square retainer in the left-hand rail (3). 6.

  • Page 191: Cargo Nets

    Load carrying S-MAX WARNING When you are using a child Vehicles without third row restraint with a support leg on a seats second row seat, make sure that you locate the support leg securely on the under floor storage compartment lid.
  • Page 192 Load carrying Installing the net E75891 Behind the front seats Behind the second row rear seats E75893 Release button...
  • Page 193 Load carrying E75892 E75894 1. Fold the seatbacks down. See Rear seats (page 131). 2. If the retention net is folded, press the red release button (C) on the hinges of the upper and lower bar 1 and unfold it. 3.

  • Page 194: Luggage Covers

    Load carrying 5. Latch the hooks on the retention LUGGAGE COVERS net belts to the luggage anchor points 3. See Luggage anchor points (page 185). 6. Tighten the belts 4. Remove in the reverse order. If you need to use the centre seat belt: E72969 Pull out the roller cover and secure it...

  • Page 195: Roof Racks And Load Carriers

    Load carrying ROOF RACKS AND LOAD LOAD RETAINING CARRIERS FIXTURES Roof rack WARNINGS If you use a roof rack, the fuel consumption of your vehicle will be higher and you may experience different driving characteristics. Read and follow the manufacturer s instructions when you are fitting a roof rack.
  • Page 196 Load carrying Installing the load retaining Luggage compartment floor fixtures (vehicles with five seats) Seatback E74997 E74999 E74998...
  • Page 197 Load carrying Installing the luggage Sliding loadspace floor anchor points E75003 E75000...
  • Page 198 Load carrying E76378 1. Turn the box over. E75001 2. Position the load bracket. 3. Secure the load bracket with four Installing the load bracket screws. WARNINGS Install the load bracket with the longest section towards the rear of the vehicle. If you install it the wrong way round, it may not hold the box in place in the event of an accident.

  • Page 199: Dog Guard

    Load carrying DOG GUARD WARNING When the dog guard is installed, do not sit in the seats behind it. CAUTION Keep a distance of at least one centimetre between the dog guard and the seats in front of it. You can install the dog guard in the following positions: E76380 5.
  • Page 200 Load carrying Installing the dog guard E75896 Bar for installing the dog guard behind the front seats Bar for installing the dog guard behind the second row seats E75892 E75897 E75898...
  • Page 201 Load carrying 1. Fold the seatbacks down. See Rear seats (page 131). 2. Attach the bar (C or D) to the luggage anchor points 1. See Luggage anchor points (page 185). Do not tighten the screws. 3. Push the ends of the bar on the grille towards each other and insert them into the retainers on the roof (A or B).

  • Page 202: Towing

    Towing TOWING A TRAILER DETACHABLE TOW BALL WARNING WARNINGS Never leave the detached tow Do not exceed the maximum ball arm unsecured inside the vehicle and trailer weight stated vehicle. This would increase the risk on the vehicle identification plate. See of injury in an accident.
  • Page 203 Towing Unlocking the tow ball arm Inserting the tow ball arm mechanism WARNING Do not use any tools for mounting or dismounting the tow ball arm. Do not modify the trailer coupling. Do not disassemble or repair the tow ball arm. E71330 E71329 WARNING...
  • Page 204 Towing Driving with a trailer Removing the tow ball arm E71331 WARNING If any of the below conditions cannot be met, do not use the tow bar and have it inspected by an expert. Before starting your journey, ensure E71332 the tow ball arm is properly locked.

  • Page 205: Retractable Tow Ball

    Towing Maintenance WARNING Remove the tow ball arm and protect the seat with the plug before steam cleaning your vehicle. Keep the system clean. Periodically lubricate bearings, sliding surfaces, and locking balls with resin-free grease or oil and the lock with graphite.
  • Page 206 Towing E76040 Note: When not in use, insert the key into the storage position (D) to the right of the handwheel. Swivelling the tow ball in WARNINGS E75173 Keep your hands away from the handwheel as it rotates during You can turn the retractable tow ball the locking process.
  • Page 207 Towing clearly audible if the level of background noise is not too high. When the locking process is completed, the warning tone stops and the handwheel will return to its original position. 6. Turn the key anticlockwise and remove it. Insert the key into the storage position.
  • Page 208 Towing clearly audible if the level of background noise is not too high. When the locking process is completed, the warning tone stops and the handwheel will return to its original position. 5. Turn the key anticlockwise and remove it. Insert the key into the storage position.
  • Page 209 Towing Note: Only the manufacturer should carry out repairs or dismantle the towing hitch. When cleaning the vehicle with a steam jet do not direct the high pressure jet directly onto the swivel joint of the tow ball arm.

  • Page 210: Driving Hints

    Driving hints RUNNING-IN Tyres WARNING New tyres need to be run-in for approximately 500 kilometres (300 miles). During this time, you may experience different driving characteristics. Brakes and clutch WARNING Avoid heavy use of the brakes and clutch if possible for the first 150 kilometres (100 miles) in town and for the first 1 500 kilometres (1 000 miles) on motorways.

  • Page 211: Emergency Equipment

    Emergency equipment FIRST AID KIT E73238 Space is provided in the underfloor storage compartment to store a first aid kit. WARNING TRIANGLE E73239 Space is provided in the underfloor storage compartment to store a warning triangle.

  • Page 212: Status After A Collision

    Status after a collision INSPECTING SAFETY SYSTEM COMPONENTS Seat belts Belts subjected to strain − as a result of an accident − should be renewed and the anchorages checked by an expert.

  • Page 213: Fuses

    Fuses FUSE BOX LOCATIONS Engine compartment fuse E72590 2. Turn the knob through 90 degrees and release the fuse box from the retaining bracket. E72588 3. Lower the fuse box and pull it towards you. Central fuse box E72622 E72589 4.

  • Page 214: Changing A Fuse

    Fuses Rear fuse box WARNINGS Switch the ignition and all electrical equipment off before touching or attempting to change a fuse. Be careful when touching any parts in a fuse box as there is a risk of injury due to high temperatures of the components.

  • Page 215: Fuse Specification Chart

    Fuses FUSE SPECIFICATION CHART Engine compartment fuse box E75525 Ampere Fuse Colour Circuits protected rating Transmission control module Glow plug (diesel engine)
  • Page 216 Fuses Ampere Fuse Colour Circuits protected rating Electric hydraulic power steering (2.0L clear Duratorq-TDCi) blue Glow plugs blue Engine cooling fan HEGO sensors 1 (engine management), variable valve timing (engine manage- ment) Relay coils Powertrain control module Not used Engine control module Valves, MAF control (engine manage- ment) Water in fuel sensor, coils, MAF (engine...
  • Page 217 Fuses Ampere Fuse Colour Circuits protected rating green Heated rear window green Headlamp washer green ABS valves orange ABS pump green Fuel fired heater orange Heater blower – – Not used – – Not used blue Horn – – Not used Light switch module, engine compart- ment fuse box coils orange...
  • Page 218 Fuses Ampere Fuse Colour Circuits protected rating blue Rear window wiper Rear fuse box E75526...
  • Page 219 Fuses Ampere Fuse Colour Circuits protected rating Left front door module (window up/ clear down, central locking, folding mirror, heated mirror) Right front door module (window up/ clear down, central locking, folding mirror, heated mirror) Left rear door module (window up/ clear down) Right rear door module (window up/...
  • Page 220 Fuses Ampere Fuse Colour Circuits protected rating green Electric front passenger seat FB10 Anti-theft alarm horn FB11 – – Not used FB12 – – Not used brown Electric rear quarter windows green Electric parking brake (EPB) green Electric parking brake (EPB) Rear air conditioning CD changer, rear seat entertainment brown...
  • Page 221 Fuses Central fuse box E75527 Ampere Fuse Colour Circuits protected rating Rain sensor SRS (airbag) supply Yaw rate sensor (ESP), electrical parking brake Electronic feed, accelerator pedal brown supply, electronic fuse blue Rear wiper...
  • Page 222 Fuses Ampere Fuse Colour Circuits protected rating blue Audio system (incl. voice control) brown Steering wheel module Cluster blue Main beam yellow Power sunroof brown Reversing lamps – – Not used blue Front fog lamp blue Front screen washer Adaptive Cruise Control (ACC) –...
  • Page 223 Fuses Ampere Fuse Colour Circuits protected rating Brake lamp switch...

  • Page 224: Vehicle Recovery

    Vehicle recovery TOWING POINTS E73241 E73240 The screw-in towing eye is located in the underfloor storage compartment behind the first row seats. The towing eye must always be carried in the vehicle. E73242 Insert your finger into the hole on the underside of the cover and prise off Mount for rear towing eye the cover.

  • Page 225: Towing The Vehicle On Four Wheels

    Vehicle recovery TOWING THE VEHICLE CAUTIONS If a speed of 50 km/h (30 mph) ON FOUR WHEELS and a distance of 50 kilometres (30 miles) is to be exceeded the drive All vehicles wheels must be lifted clear of the ground.

  • Page 226: Maintenance

    • Brake fluid level. See Brake and and resale value. There is a large clutch fluid check (page 233). network of Ford Authorised Repairers that are there to help you with their • Washer fluid level. See Washer professional servicing expertise. We fluid check (page 234).

  • Page 227: Opening And Closing The Bonnet

    Maintenance 2. Raise the bonnet slightly and OPENING AND CLOSING move the catch towards the THE BONNET left-hand side of the vehicle. Opening the bonnet E73698 E87786 1. Pull the lever. 3. Open the bonnet and support it with the strut. Closing the bonnet Note: Make sure that the bonnet is closed properly.

  • Page 228: Engine Compartment Overview - 2.0L Duratec-He (Mi4)

    Maintenance ENGINE COMPARTMENT OVERVIEW - 2.0L DURATEC- HE (MI4) E73231 Engine coolant reservoir: See Engine coolant check (page 232). : See Engine oil check (page 231). Engine oil filler cap Brake and clutch fluid reservoir: See Brake and clutch fluid check (page 233).

  • Page 229: Engine Compartment Overview - 2.3L Duratec-He (Mi4)

    Maintenance ENGINE COMPARTMENT OVERVIEW - 2.3L DURATEC- HE (MI4) E81313 Engine coolant reservoir: See Engine coolant check (page 232). : See Engine oil check (page 231). Engine oil filler cap Brake and clutch fluid reservoir: See Brake and clutch fluid check (page 233).

  • Page 230: Engine Compartment Overview - 2.5L Duratec-St (Vi5)

    Maintenance ENGINE COMPARTMENT OVERVIEW - 2.5L DURATEC- ST (VI5) E73232 Engine coolant reservoir: See Engine coolant check (page 232). : See Engine oil check (page 231). Engine oil filler cap Brake and clutch fluid reservoir: See Brake and clutch fluid check (page 233).

  • Page 231: Engine Compartment Overview - 1.8L Duratorq-Tdci (Kent) Diesel

    Maintenance ENGINE COMPARTMENT OVERVIEW - 1.8L DURATORQ-TDCI (KENT) DIESEL E73233 Engine coolant reservoir: See Engine coolant check (page 232). : See Engine oil check (page 231). Engine oil filler cap Brake and clutch fluid reservoir: See Brake and clutch fluid check (page 233).

  • Page 232: Engine Compartment Overview - 2.0L Duratorq-Tdci (Dw) Diesel

    Maintenance ENGINE COMPARTMENT OVERVIEW - 2.0L DURATORQ-TDCI (DW) DIESEL E73234 Engine coolant reservoir: See Engine coolant check (page 232). : See Engine oil check (page 231). Engine oil filler cap Brake and clutch fluid reservoir: See Brake and clutch fluid check (page 233).

  • Page 233: Engine Oil Check

    Maintenance 1.8L Duratorq-TDCi ENGINE OIL CHECK CAUTION Do not use oil additives or other engine treatments. Under certain conditions, they could damage the engine. E75474 Note: The oil consumption of new engines reaches its normal level after 2.0L Duratorq-TDCi approximately 5 000 kilometres (3 000 miles).

  • Page 234: Engine Coolant Check

    The level may therefore extend Do not top up further than the beyond the MAX mark. MAX mark. Topping up the coolant Top up with oil that meets the Ford specification. See Technical WARNING specifications (page 235). Do not remove the coolant reservoir cap when the engine Except 2.0L Duratorq-TDCi...

  • Page 235: Automatic Transmission Fluid Check

    If this of the engine. happens, rinse the affected areas immediately with plenty of water and Only add coolant that meets the Ford contact your doctor. specification. See Technical specifications (page 235). The brake and clutch systems are supplied from the same reservoir.

  • Page 236: Power Steering Fluid Check

    Maintenance POWER STEERING FLUID WASHER FLUID CHECK CHECK E73230 The front and rear washer systems are supplied from the same reservoir. Refit the washer fluid reservoir cap E73701 securely after topping up. The fluid level should come up to the MAX mark when the engine is cold.

  • Page 237: Technical Specifications

    WSS-M2C204-A2 Power Steering Fluid Motorcraft SuperPlus Antifreeze WSS-M97B44-D Antifreeze Ford or Motorcraft Super Brake fluid ESD-M6C57-A DOT 4 Brake Fluid You can use an alternative SAE 5W-30 engine oil, providing it meets the specification defined by WSS-M2C913-B. Note: If you operate your vehicle in temperatures below -20°C, you must not use SAE 10W-40 engine oil.
  • Page 238 Maintenance Capacity in litres Variant Item (gallons) Engine lubrication 2.0L Duratec-HE system - excluding the 3.9 (0.9) oil filter 2.0L Duratec-HE Engine cooling system 6.2 (1.4) 2.0L Duratec-HE Fuel tank 70 (15.4) Engine lubrication 2.5L Duratec-ST system - including the oil 5.8 (1.3) filter Engine lubrication...

  • Page 239: Vehicle Care

    Vehicle care Cleaning the rear window CLEANING THE EXTERIOR CAUTION Do not scrape the inside of the WARNING rear window or use abrasives or If you use a car wash with a chemical solvents to clean it. waxing cycle, make sure that you remove the wax from the Use a clean, lint free cloth or a damp windscreen.

  • Page 240: Cleaning The Interior

    You should repair paintwork damage caused by stones from the road or minor scratches as soon as possible. A choice of products is available from your Ford Dealer. Read and follow the manufacturer s instructions.

  • Page 241: Vehicle Battery

    Vehicle battery To connect the booster BATTERY CARE cables The battery requires very little maintenance. The fluid level is checked regularly during the routine service inspections. USING BOOSTER CABLES CAUTIONS Connect batteries with only the same nominal voltage. Always use booster cables with insulated clamps and adequate size cable.
  • Page 242 Vehicle battery Positive connection cable Negative connection cable 1. Position the vehicles so that they do not touch one another. 2. Switch off the engine and any electrical equipment. 3. Connect the positive (+) terminal of vehicle A with the positive (+) terminal of vehicle B (cable C).

  • Page 243: Wheels And Tyres

    You can obtain a replacement locking CAUTIONS wheel nut key and replacement Use only approved wheel and locking wheel nuts from your Ford tyre sizes. Using other sizes Dealer using the reference number could damage the vehicle and will certificate.
  • Page 244 Wheels and tyres Removing a road wheel 1. Remove the hub cap. WARNINGS Park your vehicle in such a position that neither the traffic nor you are hindered or endangered. Set up a warning triangle. Make sure that the vehicle is on firm, level ground with the wheels pointing straight ahead.

  • Page 245: Tyre Repair Kit

    Wheels and tyres 1. Install the wheel. 2. Install the wheel nuts finger tight. E75442 WARNING E75442 Have the wheel nuts checked for tightness and the tyre 3. Partially tighten the wheel nuts in pressure checked as soon as the sequence shown. possible.
  • Page 246 Wheels and tyres • Drive with caution and avoid WARNING making sudden steering or Compliance with these driving manoeuvres, instructions is vital to ensuring especially if the vehicle is heavily vehicle safety. Non-compliance with loaded or you are towing a trailer. these instructions means risking tyre •...
  • Page 247 Wheels and tyres Using the ContiMobilityKit • Replace the sealant canister with safely a new one before the expiry date (see top of bottle) is reached. • Use the ContiMobilityKit only for • Inform all other users of the the vehicle with which it was vehicle that the tyre has been supplied.
  • Page 248 Wheels and tyres E75437 E75436 E75438...
  • Page 249 Wheels and tyres 5. Screw the bottle clockwise into the bottle holder F until it is screwed tight. 6. Remove the valve cap from the damaged tyre. 7. Pull the protective cap G off the end of the hose and screw the hose H firmly onto the valve of the damaged tyre.
  • Page 250 Wheels and tyres 16. Leave the bottle in the holder. WARNING 17. Make sure the ContiMobilityKit, If you experience heavy the lid of the bottle and the vibrations, unsteady steering orange cap are stored safely, but behavior or noises while driving, are still easily accessible, in the reduce your speed and drive with vehicle.
  • Page 251 Wheels and tyres Note: Remember that emergency 7. Insert the power plug C into the cigar lighter socket or auxiliary roadside tyre repair kits only provide power socket. temporary mobility. Regulations concerning tyre repair after usage of 8. Start the engine (only if the vehicle ContiMobilityKit may differ from is outdoors or in a well ventilated country to country.

  • Page 252: Run Flat Tyres

    Wheels and tyres RUN FLAT TYRES Tyre Reinforced sidewall Principle of operation When a standard tyre experiences a Standard tyre drastic loss of inflation pressure, the rim of the wheel brings the full weight of the vehicle to bear on the collapsed sidewalls.

  • Page 253: Tyre Care

    Wheels and tyres Replacing run flat tyres TYRE CARE WARNINGS Make sure that the workshop is aware that your vehicle is equipped with special run flat tyres. Never repair or reuse run flat tyres that are damaged or have been driven on run flat. E70415 If a run flat tyre has to be replaced, have the respective wheel rim...

  • Page 254: Using Winter Tyres

    Wheels and tyres USING WINTER TYRES TYRE PRESSURE MONITORING SYSTEM CAUTION WARNINGS Make sure you use the correct wheel nuts for the type of wheel The system does not relieve you which the winter tyres are fitted to. of your responsibility to regularly check the tyre pressures.

  • Page 255: Technical Specifications

    Wheels and tyres If a low pressure warning message From the Information menu, select is displayed in the information display, Tyre pressure. See Information check the tyre pressures as soon as displays (page 88). possible and inflate them to the Setting the vehicle load recommended pressure.
  • Page 256 Wheels and tyres Up to 160 km/h (100 mph) Tyre pressures Normal load Full load Front Rear Front Rear Variant Tyre size (lbf/in²) (lbf/in²) (lbf/in²) (lbf/in²) 2.0L Duratec-HE 215/60 R 16 2.2 (32) 2.4 (35) 2.6 (38) 3.1 (45) 2.0L Duratec-HE 225/50 R 17 2.2 (32) 2.2 (32)
  • Page 257 Wheels and tyres Normal load Full load Front Rear Front Rear Variant Tyre size (lbf/in²) (lbf/in²) (lbf/in²) (lbf/in²) Duratorq-TDCi 215/60 R 16 2.4 (35) 2.4 (35) 2.6 (38) 3.1 (45) Duratorq-TDCi 225/50 R 17 2.4 (35) 2.2 (32) 2.6 (38) 3.1 (45) Duratorq-TDCi 235/45 R 18...

  • Page 258: Vehicle Identification

    Vehicle identification VEHICLE IDENTIFICATION ENGINE NUMBER - 2.0L PLATE DURATEC-HE (MI4) The engine number is stamped on the rear of the engine block on the left-hand side. ENGINE NUMBER - 2.3L DURATEC-HE (MI4) The engine number is stamped on the rear of the engine block on the left-hand side.

  • Page 259: Technical Specifications

    Technical specifications TECHNICAL SPECIFICATIONS Vehicle dimensions S-MAX E75180 Item Dimension description Dimension in mm (inches) Maximum length 4768 (187.7) Overall width including exterior mirrors 2154 (84.8)
  • Page 260 Technical specifications Item Dimension description Dimension in mm (inches) 1610 - 1658 Overall height at EC kerb weight (63.4 - 65.3) Wheelbase 2850 (112.2) 1578 - 1588 (62.1 - Front track 62.5) 1600 - 1610 (63.0 - Rear track 63.4)
  • Page 261 Technical specifications Galaxy E76860 Item Dimension description Dimension in mm (inches) Maximum length 4820 (189.8) Overall width including exterior mirrors 2154 (84.8) Overall height at EC kerb weight without roof 1691 - 1764 bars (66.6 - 69.4) Overall height at EC kerb weight including roof 1770 - 1807 bars (69.7 - 71.1)
  • Page 262 Technical specifications Item Dimension description Dimension in mm (inches) Wheelbase 2850 (112.2) 1578 - 1588 (62.1 - Front track 62.5) 1600 - 1610 (63.0 - Rear track 63.4) Towing equipment dimensions S-MAX E75182...
  • Page 263 Technical specifications Item Dimension description Dimension in mm (inches) Bumper – end of towball 102 (4.02) Attachment point – centre of towball 16 (0.63) Wheel centre – centre of towball 1079 (42.48) Centre of towball – side member 438 (17.24) Inner side of side member 876 (34.49) Centre of towball –...
  • Page 264 Technical specifications Galaxy E75181 Item Dimension description Dimension in mm (inches) Bumper – end of towball 101 (3.98) Attachment point – centre of towball 16 (0.63) Wheel centre – centre of towball 1128 (44.41) Centre of towball – side member 438 (17.24) Inner side of side member 876 (34.49)
  • Page 265 Technical specifications Item Dimension description Dimension in mm (inches) Centre of towball – centre 2. attachment point 473 (18.62) Centre of towball – centre 3. attachment point 685 (26.97) Vehicle weight S-MAX Vehicle weight (kg) Permissible Permissible EC kerb Variant Payload gross roof rack...
  • Page 266 Technical specifications Galaxy Permiss- Permiss- EC kerb ible roof Variant Payload ible gross weight rack weight weight 2.0L Duratec-HE 1697 2415 107 kW (145 PS) 1.8L Duratorq-TDCi 1793 2505 74 kW (100 PS) 1.8L Duratorq-TDCi 92 kW (125 PS), 5- 1793 2505 speed manual...

  • Page 267: Telephone

    Telephone Note: The mobile phone does not GENERAL INFORMATION switch off immediately after the ignition key is turned off: the power This section describes the functions down delay is preset to 10 minutes. and features of the Bluetooth mobile The time period can be adjusted to phone and voice control system.
  • Page 268 Telephone 2. Push the phone downwards until Phone a click is heard. Mobile Home Office E87688 Note: The connection to the system will be displayed on your phone. Making a phone an active phone Phonebook When using the system for the first After start up access to the time, no phone is connected to the phonebook can be delayed for up to...

  • Page 269: Bluetooth Setup

    2. The private mode must not be with your vehicle it must be bonded activated on the Bluetooth phone. to the vehicle telephone system. 3. Search for audio device. 4. Select Ford Audio. 5. The Bluetooth PIN number 0000 must be entered on the phone keypad.

  • Page 270: Telephone Controls

    Bluetooth. Mode button This is referred to as a SIS file and will be available via the Ford website. Incoming calls can be accepted by Please consult your dealer for full pressing the MODE button once or details.

  • Page 271: Using The Telephone - Vehicles Without: Navigation System

    Telephone Voice and accept/reject button Mode button only E87664 On vehicles without a VOICE button, E87662 the MODE button on the remote Voice button control is used to activate or switch off the voice control. Accept/Reject button Note: You will not be able to use the The VOICE button is used to activate MODE button to activate the voice or switch off the Voice control.
  • Page 272 Telephone Making a call Press and hold 0 to enter a + digit. Dialling a number Ending a call Calls can be ended by either: You can access your phone address book either with the phone docked • pressing one of the following in the cradle or via Bluetooth.
  • Page 273 Telephone 3. Press the call accept button a Accepting a second incoming third time to dial the number. call Second incoming calls can be Receiving an incoming call accepted by either: Accepting an incoming call • pressing the call accept button Incoming calls can be accepted by •...

  • Page 274: Using The Telephone - Travel Pilot Ex

    Telephone Using the audio unit menu USING THE TELEPHONE - TRAVEL PILOT EX 1. Press the PHONE or call accept button. This chapter describes the phone 2. Press the MENU button on the functions of the Navigation System audio unit. TravelPilot EX.
  • Page 275 Telephone Handling an incoming call Dialling a number - Bluetooth phone Accepting an incoming call Using the Bluetooth phone, phone Incoming calls can be accepted by numbers can be dialled using voice either: control, refer to the Voice control chapter. •...
  • Page 276 Telephone Accepting a second incoming 1. Press the PHONE button on the call audio unit. 2. Select the DEBOND option in the Second incoming calls can be menu. accepted by either: 3. Select the phone from the list by • Pressing the accept button.

  • Page 277: Voice Control

    Voice control Note: The voice control system is PRINCIPLE OF language specific. If you require the OPERATION system to operate in another language please consult your dealer. Voice recognition enables operation of the audio system without the need System response to divert your attention from the road As you work through a voice session ahead in order to change settings, or...

  • Page 278: Using Voice Control

    Voice control • Store up to 20 name tags per Start communicating with the function. system • The average recording time for Before you can start talking to the each name tag is approximately system you first have to press the 2-3 seconds.
  • Page 279 Voice control Overview The overview below shows the available voice commands for operating your CD player. The following lists will give further information about the complete command menu. "CD" "HELP" "DISC" "TRACK" a) Can only be used with a CD changer. b) Can be used as a shortcut.
  • Page 280 Voice control Steps User says System answer "TRACK NUMBER PLEASE" "TRACK" "<a number between 1 and "TRACK <number>" 99>" a) Can be used as a shortcut. Overview Radio The overview below shows the The radio voice commands support available voice commands for the functionality of the radio and allow operating your radio.
  • Page 281 Voice control Steps User says System answer "RADIO" "RADIO" "AM" "FREQUENCY PLEASE" "FM" "FREQUENCY PLEASE" "<frequency>" "TUNE <frequency>" Store name If you have tuned a radio station, you can store it with a name in the directory. Steps User says System answer "RADIO"...
  • Page 282 Voice control Delete name This function allows you to delete a stored radio station. Steps User says System answer "RADIO" "RADIO" "DELETE NAME" "NAME PLEASE" "<name>" "DELETE <name>" "CONFIRM YES OR NO" "YES" "DELETED" "NO" "COMMAND CANCELLED" Play directory This function allows you to let the system tell you all of the stored radio stations.

  • Page 283: Telephone Commands

    Voice control Overview TELEPHONE COMMANDS The overview below shows the Phone available voice commands of the phone system. The following lists will Your phone system allows you to give further information about the create an additional phonebook. The complete command menu. stored entries can be dialled by voice control.
  • Page 284 Voice control Create a phonebook New entries can be stored with the "STORE NAME" command. This Store name feature can be used to dial a number by calling up the name instead of the full phone number. Steps User says System answer "PHONE"...
  • Page 285 Voice control Play directory Use this function to let the system tell you all stored entries. Steps User says System answer "PHONE" "PHONE" "PLAY DIRECTORY" "PLAY DIRECTORY" Delete directory This function allows you to delete all entries in one go. Steps User says System answer...
  • Page 286 Voice control b) Only when the mobile phone is fitted with Bluetooth and voice control (dependant on the mobile phone). Dial number Phone numbers can be dialled after giving the name tag voice command. Steps User says System answer "PHONE" "PHONE"...
  • Page 287 Voice control Redial This function allows you to redial the last dialled phone number. Steps User says System answer "PHONE" "PHONE" "REDIAL" "REDIAL" "CONFIRM YES OR NO" "YES" "DIALLING" "NO" "COMMAND CANCELLED" a) Can be used as a shortcut. Note: DTMF can only be used during DTMF (Tone dialling) an ongoing call.

  • Page 288: Navigation System Commands

    Voice control Steps User says System answer "REJECT CALLS" "REJECT CALLS" Overview NAVIGATION SYSTEM The overview below shows the COMMANDS available voice commands for operating your climate control Please refer to your separate system. The following lists will give Navigation handbook for details of further information about the the command menus.
  • Page 289 Voice control Steps User says System answer "CLIMATE" "CLIMATE" "FAN SPEED PLEASE" "‘FAN" "MINIMUM" "FAN MINIMUM" "<a number between 1 and 7>" "FAN <number>" "MAXIMUM" "FAN MAXIMUM" a) Can be used as a shortcut. On vehicles fitted with an English language module the "FAN"...
  • Page 290 Voice control Steps User says System answer "<a number between 15 and "TEMPERATURE <number>" 29 °C with 0.5 increments>" or "<a number between 59 and 84 °F>" "MAXIMUM" "TEMPERATURE MAXIMUM" a) Can be used as a shortcut. Auto mode Steps User says System answer "CLIMATE"...

  • Page 291: Appendices

    Appendices If the type approval of your remote TYPE APPROVALS control is inspected, refer to the following table. Remote control Note: We recommend that you use the remote control only in the countries listed.
  • Page 292 Appendices Remote control with flip key E76938...
  • Page 293 Appendices Remote control without flip key E76939...
  • Page 294 Appendices Engine immobiliser If the type approval of your engine immobiliser is inspected, refer to the following table. E76940...
  • Page 295 Appendices E76941...
  • Page 296 Appendices E76942 Alarm If the type approval of your alarm is inspected, refer to the following official test numbers.

  • Page 297: Type Approvals

    /declaration_of_conformity The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Ford Motor Company is under license. Other trademarks and trade names are those of their respective owners. Nokia Corporation Keilalahdentie 4,...
  • Page 299 Index Ashtray..........140 Audible warnings and indicators........87 Switching the chimes on and off..87 See: Climate control......113 Audio control........49 About this handbook......7 Mode.............49 Seek............50 See: Brakes.........160 Audio unit commands....276 ABS driving hints CD Player/CD Changer....276 See: Hints on driving with ABS..160 Radio...........278 Auto-dimming mirror.......81 See: Adaptive cruise control Autolamps........57...
  • Page 300 Index Auxiliary heater.......122 Catalytic converter......153 Diesel auxiliary heater (depending on Driving with a catalytic converter..153 country)..........125 Parking..........154 Centre console.......141 Fuel operated heater (depending on Changing a bulb......63 country)..........125 Parking heater........122 Approach lamp........65 Auxiliary input (AUX IN) Central high mounted brake lamp socket...........146 (Galaxy)..........72 Auxiliary power sockets....140...
  • Page 301 Index Child safety locks......24 Direction indicators......61 Child seat positioning......21 Disabling the passenger Child seats........19 airbag..........32 Child restraints for different mass Disabling the passenger airbag..33 groups..........19 Enabling the passenger airbag..33 Cigar lighter........139 Fitting the passenger airbag Cleaning the exterior....237 deactivation switch......33 Disarming the alarm......47 Body paintwork preservation..237 Cleaning the chrome trim....237...
  • Page 302 Index Electric windows......76 Fuel and refuelling......153 Anti-trap function.........77 Technical specifications....154 Fuel burning heater Driver s door switches......76 Front and rear passengers door See: Auxiliary heater......122 Fuel consumption switches..........77 Global opening and global See: .............154 Fuel consumption......154 closing..........76 Fuel filler flap........154 Opening and closing the windows Fuel quality..........
  • Page 303 Index Headlamp levelling......58 Information messages....102 Recommended headlamp levelling Active suspension......103 switch positions.......58 Alarm............103 Headlamp washers......53 Battery and charging system..104 Head restraints......130 Climate control........104 Adjusting the head restraint.....130 Cruise control / Adaptive cruise Removing the head restraint...130 control (ACC)........104 Heated seats.........135 Doors open.........105 Heated windows and mirrors..121 Engine immobiliser......106...
  • Page 304 Index Locking and unlocking....36 Automatic relocking......38 Central locking........36 Keyless entry........39 Double locking........36 Disabled keys........42 Locking and unlocking General information......39 confirmation........36 Locking and unlocking the doors with Locking and unlocking the doors from the key blade........42 inside..........38 Locking the vehicle......40 Locking and unlocking the doors with Passive key...........40 the key..........37 Unlocking the vehicle......41...
  • Page 305 Index Manual transmission.....156 Parking brake........161 All vehicles...........156 Applying the parking brake....161 Vehicles with a 5-speed Parking on a hill........161 transmission........156 Releasing the parking brake.....161 Parts and accessories......7 Vehicles with a 6-speed transmission Personalised settings.....99 (2.5L Duratec-ST engine).....156 Vehicles with a 6-speed transmission Help screen, radio, navigation and (Turbo diesel engines)....156 phone information......99...
  • Page 306 Index Stability control.......166 See: Changing the remote control battery..........34 Principle of operation......166 Remote control programming Stability control See: Programming the remote See: Using stability control....167 Starter switch control..........34 Removing a headlamp....62 See: Ignition switch......147 Repairing minor paint Starting a diesel engine....151 damage........238 Cold or hot engine......151 Retractable tow ball.....203...
  • Page 307 Index Telephone commands....281 Type approvals....289, 295 Create a phonebook......282 Bluetooth/voice recognition system Main settings........285 - declaration of conformity..295 Tyre care.........251 Phone...........281 Tyre pressure monitoring Phone functions........283 Telephone controls......268 system.........252 Ending or rejecting calls....268 Checking the tyre pressures...253 Remote control.........268 Setting the vehicle load....253 Telephone setup......265 Tyre repair kit.........243 Bond another Bluetooth phone..267...
  • Page 308 Index Using HLA........168 Voice control........275 Activating the HLA......169 Principle of operation......275 Deactivating the HLA......170 Using seat belts during pregnancy........32 Using snow chains.......252 Warning lamps and indicators..84 Using stability control....167 ABS warning lamp.......84 Using the key........34 Airbag warning lamp......84 Remote control with flip key Brake system warning lamp....84 blade..........34 Cruise control indicator......85...
  • Page 309 Index Windscreen wipers......51 Intermittent wipe........51 Winter tyres See: Using winter tyres....252 Wipers and washers.......51 Technical specifications......55...
  • Page 312 Feel the difference...

This manual is also suitable for:

S-max 2007

Table of Contents