Table of Contents
Advertisement
Clean the wiper blade lips with water
applied with a soft sponge.
CHANGING THE WIPER
BLADES
Windscreen wiper blades
CAUTIONS
Set the windscreen wipers in the
service position to change the
wiper blades.
You can use the service position
in winter to provide easier access
to the wiper blades for freeing them
from snow and ice. The windscreen
wipers will return to their normal
position as soon as you switch on the
ignition so make sure that you fully
defrost the windscreen before you
switch on the ignition.
Setting the windscreen wipers
in the service position
E75184
Wipers and washers
E75188
Switch off the ignition and move the
wiper lever to position A within three
seconds. Release the lever when the
windscreen wipers have moved to
the service position.
Changing the windscreen
wiper blades
1
E72899
Note: The windscreen wiper blades
are different lengths. See Technical
specifications (page 55). If you
install wiper blades of the wrong
length, the rain sensor may not work
correctly.
Set the windscreen wipers in the
service position and lift the wiper
arms.
1. Press the locking button.
2. Remove the wiper blade.
54
A
2
Advertisement
Table of Contents
