Table of Contents
Advertisement
2
E73137
1. Press the spring hook (1) and
unhook it downwards.
2. Let the belt retract and push the
hook into the retainer on the trim
panel until it engages with an
audible click (2).
Latching the belts to the floor
lugs
WARNING
After latching the seat belt to the
floor lug, pull the belt to ensure
that it is latched correctly.
1. Pull the belt out of the retainer on
the trim panel.
2. Slide the spring hook down and
latch it in the lug with the spring
hook facing away from the seat.
Occupant protection
SEAT BELT HEIGHT
ADJUSTMENT
E73135
To raise the height, grasp the D-ring
and move the pivot up.
To lower the height, grasp the D-ring,
hold the locking button on the height
adjuster pressed and move the pivot
down.
Note: Lifting the slider slightly while
pressing the locking button makes it
easier to release the locking
mechanism.
31
Advertisement
Table of Contents
