Using The Remote Control - Master G5 User Manual

Using the remote control

The remote uses a 2.4G Radio control. Connect the remote control to your device so
that it does not interfere with other devices
How to connect your remote:
1: Connect the vibration and turn it on. The power light will brighten with red color
after a long "Ring"
2: Press the remote control button
until hear two sounds from Vibration. The remote control and Vibration plate are
connected.
Button Functions
"+"
Accelerate the Frequency of Vibration
"-"
Decelerate the Frequency of Vibration
" " START / STOP
Staring function: In standby mode, press the STAR/STOP button to start the Vibration.
Stop function: Press the STAR/STOP button to stop Vibration directly.
"+" :
Accelerate the Frequency of Vibration ,1-99 Level .
Press the bottom to accelerate when machine is operating.
"-" :
Decelerate the Frequency of Vibration ,1-99 Level
Press the bottom to decelerate when machine is operating.
Troubleshooting:
1. To test if the remote is connected to the vibration, press the
a sound will be played now. If only one sound is heard, there is a stable connection. If
a sound is played twice, the connection is faulty. If no sound is heard at all, reconnect
the remote to the device as described above.
2. If the remote control is successfully connected but not working ,disconnect the
vibration plate from the power supply. Then repeat the connection process.
3. If you press a button on the remote control and the vibration plate does not work
despite the LED flashing, change the batteries in the remote control .
Assemble Step:
"+" "-"
and simultaneously, release the buttons
25
"+" "-"
or Button once
EN