Setting Up Two Guest Wifi Networks On Different Wifi Bands - ZyXEL Communications AX Series User Manual

Hide thumbs Also See for AX Series:

Table of Contents

5.3.4 Setting Up Two Guest WiFi Networks on Different WiFi Bands

In this example, a company wants to create two Guest WiFi networks: one for the Guest group and the

other for the VIP group as shown in the following figure. Each network will have its SSID and security

mode to access the internet.

• The Guest group will use the 2.4G band.

• The VIP group will use the 5G band.

The Company will use the following parameters to set up the WiFi network groups.

Table 17 WiFi Settings Parameters Example

Security Mode

Pre-Shared Key

Go to the Wireless > General screen and set Band to 2.4GHz to configure 2.4G Guest WiFi settings for

Guest. Click Apply.

Note: You will not be able to configure the 2.4G and 5G Guest WiFi settings separately if Keep

the same settings for 2.4G and 5G wireless network is enabled.

Chapter 5 Tutorials

AX/DX/EX/PX Series User's Guide