ZyXEL Communications AX Series User Manual page 74

Hide thumbs Also See for AX Series:

Table of Contents

In this example, configure the following information for the Ethernet connection.

Connection Mode

Encapsulation

IPv6/IPv4 Mode

Enter the General settings provided by your Internet service provider.

Enter a Name to identify your WAN connection.

Set the Type to Ethernet.

Set your Ethernet connection Mode to Routing.

Choose the Encapsulation specified by your Internet service provider. For this example, select IPoE

or PPPoE as the WAN encapsulation type.

Set the IPv4/IPv6 Mode to IPv4 Only.

Under Routing Feature, enable NAT and Apply as Default Gateway.

For the rest of the fields, use the default settings.

Click Apply to save your settings.

Chapter 5 Tutorials

My ETH Connection

AX/DX/EX/PX Series User's Guide

Troubleshooting