Setting Up An Ethernet Connection - ZyXEL Communications AX Series User Manual

The new connection is displayed on the Broadband screen.

5.2.2 Setting Up an Ethernet Connection

If you connect to the Internet through an Ethernet connection, you need to connect a broadband
modem or router with Internet access to the WAN Ethernet port on the Zyxel Device. You need to
configure the Internet settings from the broadband modem or router on the Zyxel Device. First, make
sure you have Internet access through the broadband modem or router by connecting directly to it.
Make sure you have the Ethernet WAN port connect to a modem or router.
1
Go to Network Setting > Broadband and then the following screen appears. Click Add New WAN
2
Interface to add a WAN connection.
Chapter 5 Tutorials
AX/DX/EX/PX Series User's Guide
73