Wmm - ZyXEL Communications AX Series User Manual

Table 50 Network Setting > Wireless > WPS (continued)
LABEL
Release
Configuration
Generate
New PIN
Cancel
Apply

9.6 WMM

Use this screen to enable WiFi MultiMedia (WMM) and WMM Automatic Power Save (APSD) in wireless
networks for multimedia applications. WMM enhances data transmission quality, while APSD improves
power management of WiFi clients. This allows delay-sensitive applications, such as voice and videos, to
run more smoothly.
Click Network Setting > Wireless > WMM to display the following screen.
Figure 106 Network Setting > Wireless > WMM
Note: WMM cannot be disabled if 802.11 mode includes 802.11n or 802.11ac.
Note: APSD only affects SSID1. For SSID2-SSID4, APSD is always enabled.
Chapter 9 Wireless
DESCRIPTION
The default WPS status is configured.
Click this button to remove all configured WiFi and WiFi security settings for WPS connections on
the Zyxel Device.
If this method has been enabled, the PIN (Personal Identification Number) of the Zyxel Device is
shown here. Enter this PIN in the configuration utility of the device you want to connect to using
WPS.
The PIN is not necessary when you use the WPS push-button method.
Click the Generate New PIN button to have the Zyxel Device create a new PIN.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
AX/DX/EX/PX Series User's Guide
194