Ex5600-T1, Ex5601-T0, And Ex5601-T1 - ZyXEL Communications AX Series User Manual

The following table describes the items on the ports panels of DX3300-T0, DX3301-T0, DX5301-B2/B3,
DX5401-B0, EX3300-T0/EX2210-T0, EX3301-T0, EX5300-B3, EX5301-B3 and EX5401-B0.
Table 12 Panel Ports and Buttons
LABEL
WAN
LAN1 – LAN4
FIBER
USB
DSL
PHONE1/2
RESET
POWER
WPS
WLAN

2.3.3 EX5600-T1, EX5601-T0, and EX5601-T1

Figure 31 EX5600-T1
Chapter 2 Hardware
DESCRIPTION
For DX5301-B3, EX3300-T0/EX2210-T0, EX3301-T0, EX5300-B3, EX5301-B3 and EX5401-B0, connect an
Ethernet cable to the WAN port for Internet access.
For DX5301-B2, connect an Ethernet cable or a SFP cable for Internet access.
Connect computers or other Ethernet devices to Ethernet ports for Internet access.
For DX5401-B0 and EX5401-B0, Insert a compatible SFP transceiver to the FIBER port and connect the
fiber cable for Internet access.
The USB port is used for cellular WAN backup, file-sharing, and media server.
For DX3300-T0, DX3301-T0, DX5301-B2/B3 and DX5401-B0, connect a DSL cable to the DSL port for
Internet connection.
F
or DX3301-T0, DX5301-B2/B3, DX5401-B0, EX3301-T0, EX5301-B3,and EX5401-B0, connect analog
phones to the PHONE ports to make phone calls.
Press the button to return the Zyxel Device to the factory defaults.
Connect the power adapter and press the ON/OFF button to start the device.
Press the WPS button for more than 5 seconds to quickly setup a secure wireless connection
between the device and a WPS-compatible client.
Press the WLAN button for more than 2 seconds to enable the wireless function.
AX/DX/EX/PX Series User's Guide
49