The Parental Control Screen - ZyXEL Communications AX Series User Manual

Each field is described in the following table.
Table 27 LAN Setup
LABEL
LAN IP Setup
IP Address
Subnet Mask
IP Addressing Values
Beginning IP
Address
Ending IP
Address
DHCP Server State
DHCP Server
Lease Time
Days/Hours/
Minutes
Save

7.3 The Parental Control Screen

Use this screen to view the number of profiles that were created for parental control.
Figure 78 Parental Control
Click the yellow Arrow icon to open the following screen. Use this screen to enable parental control and
add more profiles. Add a profile to create restricted access schedules. Go to the Security > Parental
Control > Add New PCP/Edit screen to configure URL filtering settings to block the users on your network
from accessing certain web sites.
Chapter 7 Connection Status
DESCRIPTION
Enter the LAN IPv4 IP address you want to assign to your Zyxel Device in dotted decimal
notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your Zyxel Device automatically computes the subnet mask based on the
IP Address you enter, so do not change this field unless you are instructed to do so.
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the last of the contiguous addresses in the IP address pool.
This is the period of time a DHCP-assigned address is valid, before it expires.
When a client connects to the Zyxel Device, DHCP automatically assigns the client an IP
addresses from the IP address pool. DHCP leases each addresses for a limited period of time,
which means that past addresses are "recycled" and made available for future
reassignment to other devices.
Enter the lease time of the DHCP server.
Click Save to save your changes.
AX/DX/EX/PX Series User's Guide
142