Table of Contents
Advertisement
5 CONTROLS
SETTINGS MENU
Please note some functions require a PIN to access.
5.2.Z.36 MODE MENU______________________________________________________
Select the mode and accept
5.2.Z.37 AUTOMATIC / MANUAL / CREEP MODE SELECTION ____________________
Press the button
up and down
Automatic (A), Manual (M) and Creep.
Note.
The mode selection can only be changed when the machine is stopped.
Select the required mode and accept
Press the button
to return to previous menu.
1.
Manual Mode - Works as a conventional mechanical over hydraulic
drive system.
2.
Auto Mode - Automatic drive features enabled,
•
AdaptiCut - Load sensing system adjusts ground speed to maintain optimum cutting performance.
•
Auto Idle -Throttle drops to idle when pedal returns to neutral during transport operations.
3.
Creep Mode - Cutting system disabled and max speed limited to 8kph (5mph) for safe, controlled use in
workshops, storage facilities and when loading onto vehicles.
5.2.Z.38 MEASURE UNITS MENU ____________________________________________
Select the measure units and accept
en-36
to move between modes.
S e t t i n g s M e n u
M o d e
M e a s u r e U n i t s
PIN
B r i g h t n e s s
MOD E S e tt in g
A u to ma ti c (A )
M a n u a l ( M )
Cr ee p
Set t ings M enu
M o d e
M e a s u r e U n i t s
PI N
Advertisement
Table of Contents
