3
SPECIFICATIONS
3
SPECIFICATIONS
3.1
PRODUCT IDENTIFICATION_________________________________________________
62305G01 ....................... Greens King IV, 50 state, 16 hp
62306G01 ....................... Greens King IV, 50 state, 18 hp
Serial Number ................ An identification plate, like the one
3.2
ENGINE__________________________________________________________________
Make .................................... Briggs & Stratton
Model ................................... Vanguard V-Twin OHV
Horsepower (GK IV) ............ 16 hp (12 kW) @ 3600 RPM
Horsepower (GK IV Plus) .... 18 hp (13.5 kW) @ 3600 RPM
Displacement ....................... 29.3 cu. in. (480 cc)
Torque ................................. 26 ft. lbs. (35 Nm) @
Fuel:
Type ............................... Unleaded Gasoline
Rating ............................ Min. 85 Octane
Capacity ......................... 5 U.S. gal. (18.9 liters)
NOTICE
Do not use premium gasoline or an oil-gasoline
mixture. When using blended fuel, do not use a blend
with more than 10% ethanol. Under no circumstances
should you use a blend with methanol.
3.3
CUTTING UNITS: __________________________________________________________
Reel ................................ 3 Reels, 22 in. (559 mm) wide.
Reel Diameter ................. 5 in. (127 mm)
Blade Options ................. 7, 9 or 11 blades
Cutting Width .................. 62 in. (1574 mm)
8
gasoline engine, manual steering.
Without mowers.
gasoline engine, power steering.
Without mowers.
shown, listing the serial number, is
attached to the frame of the
mower near the battery.
2600RPM
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
AUGUSTA, GA
Governor...............................Flyweight Mechanical
Lubrication:
Capacity..........................3.5 pints (1.4 liters)
Type................................SAE 30W
API Classification ...........SF, SG, SH
Air Filter ................................Replaceable Dual Element.
Alternator ..............................16 amp
Cooling System ....................Air Cooled
Cutting Frequency:
7 Blade ..................... 0.084 in./mph (1.33 mm/kph)
9 Blade ..................... 0.065 in./mph (1.03 mm/kph)
11 Blade ................... 0.053 in./mph (0.84 mm/kph)
®
PRODUCT OF U.S.A.