Table of Contents
Advertisement
10 QUALITY OF CUT
10.11 LAYING UNCUT GRASS ________________________________________________
NOTE: The Arrow indicates direction of travel.
Possible Cause
Mowing (ground) speed is too fast.
HOC set close to the actual grass height.
Too much material to clear rear of unit, brought
round the unit pushing over the grass.
Lot of dead damp grass wrapped on the front of the
flail cutting edges, beating the grass down.
Grass always cut in same direction.
en-114
Areas of grass has been left uncut, and lays flat.
TN1235
Reduce mowing (ground) speed.
Reduce HOC.
Reduce mowing (ground) speed.
Cut when grass is less wet or replace damaged
blades.
Cut grass in opposite direction.
Correction
Advertisement
Table of Contents
