Tarter Key Switch; Arking Brakes; Ransport Lock Switch - Jacobsen ZB Series Safety, Operation And Maintenance Manual

5 CONTROLS
5.2.A S TARTER KEY S WITCH ______________________________________________
Turn the starter key to the right to the 'start' position to start the engine. When
the engine starts, release the key and allow to return automatically to the 'on'
position to run.
NOTE. There can be a time delay before the engine starts, it depends on
the engine temperature while the glow plugs operate automatically.
5.2.B THROTTLE CONTROL ROTARY ________________________________________
Rotate the control to the right to increase the engine speed and toward the left
to decrease the engine speed.
NOTE: Operate the engine at full speed.
5.2.C PARKING BRAKES ___________________________________________________
Move the orange button back and press the switch to engage the parking
brake.
When the engine is stopped, the parking brake is applied.
To release the parking brake, press the opposite end of the switch.
The parking brake icon
engaged.
DO NOT apply the brake while the machine is in motion.
5.2.D TRANS PORT LOCK S WITCH __________________________________________
Engages the wing unit locks for transport
The wing unit lock icon
engaged.
en-22
is displayed on the visual display screen when
is displayed on the visual display screen when