10 QUALITY OF CUT
10.9 MARCELLING ________________________________________________________
NOTE: The Arrow indicates direction of travel.
Possible Cause
Mowing (ground) speed is too fast.
HOC (height-of-cut) setting is too low for turf
conditions.
Flail Blade security or wear.
en-112
Marcelling, like wash boarding, is a cyclical pattern
of varying cutting heights, resulting in a wave-like cut
appearance. In most cases, the wave tip-to-tip
distance is 2 in. (5 cm) or less.
TN1278
Reduce mowing (ground) speed.
Check/adjust HOC to turf conditions.
Check & replace as necessary.
Correction