EXCELL PRECISION CO., LTD.
Stable Transmission in totalizing mode (r n P 5)
S/N
WT/UNIT ( kg / lb )
- - - - - - - - - - - - - -
0001
1.0000
0002
1.0000
0003
1.0000
0004
1.0000
0005
1.0000
- - - - - - - - - - - - - -
0005
5.0000
Press
key to transmit simple free format (r n P 6)
Same format as (r n P 3). Print the complete format for the first time. Then only print NET weight.
Please refer to F14 for details.
Press
key to transmit complete free format (r n P 7)
Same format as (r n P 4). Print the complete format all the time. Please refer to F14 for details.
RS232 output format in HOLD MODE
(r n P 8)
Please set
the display.
1
.
Print after Removing Goods (5% mode) (r n P 11)
Stage
1: Goods placed
and weighed on
platter
2: Just removed
goods from platter
Print after Removing Goods (OK mode) (r n P 12)
Stage
1: Goods placed
and weighed on
platter
2: Just removed
goods from platter
02036XXX
The scale is stable
The scale is stable
The scale is stable
The scale is stable
The scale is stable
Press
in F5. If there is only RS-232, press
0
0
0
k
Condition(s)
Weight has become stable.
Weight > zero point
Weight ≥ 20 weighing units
(i.e. 5% x Weight ≥ 1 weighing unit)
Instantaneous weight reading drops
below 95% of last stable weight (stable
weight of Stage 1)
Condition(s)
Weight has become stable.
Weight > zero point
Check weighing OK status (within a
predetermined weight range)
Instantaneous weight reading drops
below 95% of last stable weight (stable
weight of Stage 1).
twice to print TOTAL
g
<CR> <LF>
16
to print out the HOLD value on
Action(s)
Beeper beeps twice, and
printing data (stable weight
compliant with conditions on
the left) is ready to be sent.
Printing data of Stage 1 is
sent to the printer (same
printing formats as those of
(r n P 1).
Action(s)
Beeper beeps twice, and
printing data (stable weight
compliant with conditions on
the left) is ready to be sent.
Printing data of Stage 1 is
sent to the printer (same
printing formats as those of
(r n P 1).
ZSME300000422