Excell X Series User Manual page 18

EXCELL PRECISION CO., LTD.
Continuous transmission, bluetooth format (r n P 13)
HEAD1 ( 2 BYTES )
OL - Overload , Under load
ST - Display is Stable
US - Display is Unstable
DATA (8 BYTE )
2B ( HEX ) = " + " ( PLUS)
2D ( HEX ) = " – " ( MINUS )
2E ( HEX ) = " . " ( DECIMAL POINT )
UNIT (3 BYTE )
' 'kg; ' 'lb; tlT; hkg; vis
1. The gross weight (+0.876 kg) shows as below, after stable: (no tare or pre-tare mode)
S T , G
HEAD1 , HEAD2
Stable transmission only weight value is transmitted (r n P 14)
No +/-. If display is 1.000kg , transmit
F5
Function
r n p 0
RS232 command mode
r n p 1
Stable transmission
r n p 2
Continuous transmission.
Press
r n p 3
simple format
Press
r n p 4
complete format.
Stable transmission in totalizing
mode (After return to zero,
r n p 5
transmit next stable weight which
is > +10d)
Press
r n p 6
simple free format
Press
r n p 7
complete free format
Press
r n p 8
same format as (r n P 1) and (r n
P 2)
r n p 9
Continuous Transmission (Brazil)
02036XXX
HEAD2 ( 2 BYTES )
N -
G -
GS -
, +
,
key to transmit
key to transmit
key to transmit
key to transmit
key to transmit
TARE Mode
NET Mode
GROSS Mode
0 . 8 7 6
DATA
1
DATA
Press key Press
Once received read weight command, transmit weight in
same format as r n p 1.
After return to zero, transmit next stable weight.
RS232 transmit continuously. Keypad has no effect.
Transmit when Transmit when
weight change weight change
>±10d, >±10d,
Transmit when Transmit when
weight change weight change
>±10d, >±10d,
No transmission No transmission
Transmit when Transmit when
weight change weight change
>±10d, >±10d,
Transmit when Transmit when
weight change weight change
>±10d, >±10d,
Transmit as
No transmission stable weight
>±10d
Continuous Continuous
transmission transmission
17
k g
<CR> <LF>
UNIT CR
. 0 0 0
key Press
twice after zeroing
Print TOTAL and
clears totalized
values
Print TOTAL and
clears totalized
values
Print TOTAL and
clears totalized
values
Print TOTAL and
clears totalized
values
Print TOTAL and
clears totalized
values
No transmission,
totalized values not
cleared
Continuous
transmission,
totalized values not
cleared
ZSME300000422
LF
<CR> <LF>
CR LF
key