EXCELL PRECISION CO., LTD.
3-1 F4 Check Weighing Configurations
If hold mode (
Press
Press
Preset "LO value"
(LO value 10d)
Press
and
key to set " LO value"
E.g. LO value = 2 kg
Press
key
Preset "HI value"
(HI value LO value)
Press
and
key to set "HI value"
E.g. LO value = 2.5 kg
Press
key
Preset "Beeper value"
Press
and
key to set "HI value"
E.g. Beeper value = 22
Press
key
02036XXX
) is set, accessing to F4 is denied.
or
key to select F4
key
Press
to clear HI, OK, LO values
kg
.
kg
.
kg
.
kg
.
kg
kg
key for 5 times
key = Increase the flash value by one (from 0
to 9)
key = Confirm key
A
A 0 = After stable, the beeper beeps and the
indications are on
1 = After stable, the beeper beeps; whether
stable or not, the indications are on.
2 = whether stable or not, the beeper beeps
and the indications are on.
3 = open warning device: when the weight is
higher than HI value and the weight is
stable, LCD is on and Relay Card open.
B
0 = No beep
1 = OK (when the weight is between Low limit
& High limit.), the beeper beeps.
2 = When the weight is under or equal to Low
limit (must be over 10d) & over or equal
to High limit, the beeper beeps.
LCD indication description:
10d Low limit value High limit value
12
.
Press
key
B
ZSME300000422
kg