System Upgrades - Agilent Technologies 8510C Configuration Manual

System upgrades

Upgrades available for existing Agilent 8510 systems to
8510XF single-sweep systems
Upgrades 85107B
85109C
from ...
... to 85 GHz E7345A
... to 110 GHz E7355A
8510C
Millimeter
subsystem
83651B
83621B
Upgrades for 85107B and 85109C
Upgrade consists of two test heads, a millimeter
test set controller, an 83621B for LO source, and
rack. It does not include calibration kits or test
port cables.
• E7345A upgrade to an 8510XF 85 GHz system
• E7355A upgrade to an 8510XF 110 GHz system
The following options are available for both
upgrades:
• E73x5A-STD Standard configuration
• E73x5A-005 Add 45 MHz to 2 GHz low frequency
extension
• E73x5A-006 Add RF pass thru (provides coupled
output of 50 GHz source for additional test sets.
Additional test set(s) must have option 001
installed.)
• E73x5A-056 Add both low frequency extension
and RF pass thru
12
85106C w/ Opt.001 & 002
85106C
85106D w/ Opt.001
85106C w/ Opt.002
85109C w/ Opt.002
85106D
E7346A
E7356A
E7347A
E7357A
Customer
owned
equipment
Upgrades for 85106C, 85106C with Option 002 (replaced
8350B/83540A with 83621A/B) 85106D
Upgrade consists of two test heads, a millimeter
test set controller, and an 83651B for RF source. It
does not include calibration kits, test port cables,
or rack.
• E7346A upgrade to an 8510XF 85 GHz system
• E7356A upgrade to an 8510XF 110 GHz system
The following options are available for both
upgrades:
• E73x6A-STD Standard configuration
• E73x6A-005 Add 45 MHz to 2 GHz low frequency
extension
• E73x6A-006 Add RF pass thru (provides coupled
output of 50 GHz source for additional test sets.
Additional test set(s) must have option 001
installed.)
• E73x6A-056 Add both low frequency extension
and RF pass thru