Agilent Technologies 8510C Configuration Manual page 2

Agilent E7350A single-connection single-sweep network
analyzer system (2 to 110 GHz)
The E7350A is a complete system configured with
an 8510C, a 20 GHz and 50 GHz synthesizer, two
110 GHz S-parameter test heads, and a millimeter
test set controller. The instruments are integrated
in the system rack, the system is fully tested, and a
complete system verification is performed prior to
shipment from Agilent. Installation is included at
no additional charge. The E7350A system does not
include calibration kits or test port cable sets.
System components include:
8510C network analyzer
E7352A millimeter subsystem
83621B synthesizer
83651B synthesizer
System rack
Calibration kits and test port cables are not
included and must be ordered separately.
Test set options
• E7340A-STD Standard configuration
• E7340A-005 Add (45 MHz to 2 GHz) low
frequency extension
• E7340A-006 Add RF pass thru (provides
coupled output of 50 GHz source for additional
test set(s). Additional test set(s) must have
Option 001 installed)
• E7340A-056 Low frequency extension and RF
pass through
Features
• 8510C-010 Add time domain
Voltage options
• E7340A-115 110/120 V line voltage operation
• E7340A-230 220/240 V line voltage operation
Extended service options are available.
Agilent 85107B network analyzer system
(45 MHz to 50 GHz)
The 85107B is a complete system configured with
a 50 GHz synthesizer, 50 GHz S-parameter test set,
and 2.4 mm measurement accessories. The instru-
ments are integrated in the system rack, the system
is fully tested, and a complete system verification
is performed prior to shipment from the factory.
Installation is included at no additional charge.
2
System components include:
8510C network analyzer
8517B test set with Option 002
(deleted step attenuators and bias tees)
83651B synthesizer
85056A calibration kit
85133F cable set
85043C rack
Test set options
• 85107B-STD Standard configuration
• 85107B-005 Add attenuators and bias network
(not compatible with 85107B-STD)
• 85107B-007 High power and high dynamic
range configuration (requires 85107B-005)
Source options
• 85107B-51B Standard 50 GHz synthesized
sweeper, no front panel
• 85107B-50B 50 GHz synthesized source with
front panel
• 85107B-50L 50 GHz CW synthesized source
with front panel
Features
• 8510C-010 Add time domain
Voltage options
• 85107B-115 110/120 V line voltage operation
• 85107B-230 220/240 V line voltage operation
Accessories
• 85107B-002 2.4mm calibration kit and cables
• 85107B-001 3.5mm calibration kit and cables
• 85107B-E33 Do not include 2.4mm kit and
cables (not compatible with 85107B-002)
Extended service options are available.