Agilent Technologies 8510C Configuration Manual page 10

Configuration B. This cable arrangement is for appli-
cations where the device under test is connected
between cable ends. This setup offers more flexibil-
ity when connecting to the device under test.
For Agilent 8514B/8515A/85110A test sets
(3.5 mm rugged test port connectors)
Cables/adapters
For 3.5 mm 85131D semi-rigid cable set or
devices 85131F flexible cable set
For 7 mm 85132D semi-rigid cable set or
devices 85132F flexible cable set
For Type-N Use 7 mm cables and the 7-mm-
devices to-Type-N adapters included in the
85054B/D Type-N calibration kit
For Agilent 85110L test sets
(7 mm rugged test port connectors)
Cables/adapters
For 7 mm 11857D cable pair
devices
CONFIGURATION B
network analyzer
test set
cable set
device
under
test
10
For Agilent 8517B test sets
(2.4 mm rugged test port connectors)
For 2.4 mm
devices
Connector type
(on device side of For 3.5 mm
cable/adapter) devices
3.5 mm (m and f) For 7 mm
3.5 mm (m and f) devices
7 mm
For Agilent 8510XF systems (1.0 mm test port connectors)
7 mm
For 1.0 mm
devices
For V-band
waveguide
Connector type
devices
(on device side of
cable/adapter)
For W-band
7 mm
waveguide
devices
Cables/adapters
85133D semi-rigid cable set or
85133F flexible cable set
85134D semi-rigid cable set or
85134F flexible cable set
85135D semi-rigid cable set or
85135F flexible cable set
Cables/adapters
11500I (8.8 cm) test port cable
11500J (16 cm) test port cable
11500K (20 cm) test port cable
11500L (24 cm) test port cable
V281C adapter
V281D adapter
W281C adapter
W281D adapter
Connector type
(on device side of
cable/adapter)
2.4 mm (m and f)
2.4 mm (m and f)
3.5 mm (m and f)
3.5 mm (m and f)
7 mm
7 mm
Connector type
1.0 mm (f and f)
1.0 mm (m and f)
1.0 mm (m and f)
1.0 mm (m and f)
1.0 mm (f) to V-band
waveguide devices
1.0 mm (m) to V-band
waveguide devices
1.0 mm (f) to W-band
waveguide devices
1.0 mm (m) to W-band
waveguide devices