Agilent Technologies 8510C Configuration Manual page 6

Millimeter-wave test sets and controllers
Banded waveguide millimeter-wave subsystem
(Components of 85106D)
• 85105A millimeter-wave test set controller
Requires addition of two 85104A series modules
for complete waveguide S-parameter test set
operation. Includes IF switching capability
and 26.5 GHz RF switching for multiple test set
operation.
85105A-STD Standard configuration
85105A-050 50 GHz RF source switch (Required
when used with 83651B 50 GHz source.)
Must also order two test set modules for complete
waveguide S-parameter test set operation for each
waveguide band:
• Q85104A test set module (33 GHz to 50 GHz)
• U85104A test set module (40 GHz to 60 GHz)
• V85104A test set module (50 GHz to 75 GHz)
• W85104A test set module (75 GHz to 110 GHz)
Extended service options are available.
6
Sources
Choose an 8360 series synthesized sweeper
• 83651B synthesized sweeper (45 MHz to 50 GHz)
• 83631B synthesized sweeper (45 MHz to 26.5 GHz)
• 83621B synthesized sweeper (45 MHz to 20 GHz)
• 83620B-H80 synthesized sweeper (45 MHz to
2 GHz) for 85110L only
• 83622B synthesized sweeper (2 GHz to 20 GHz)
for 85110A
• 83623L synthesized sweeper (45 MHz to 20 GHz) for
85110A