Table of Contents
Advertisement
Quick Links
MULTI-FORMAT MONITOR
DT-V1900CG
For Customer Use:
Enter below the Serial No. which is located on the rear of
the cabinet. Retain this information for future reference.
:
Model No.
DT-V1900CG
:
Serial No.
INSTRUCTIONS
UNDER
MUTING
DEGAUSS
VOLUME
MENU
SCREENS
CHECK
The illustration above shows the DT-V1900CG with provided
wide mask attached.
PULSE
COLOR
SCAN
CROSS
OFF
SLOT 1
POWER
SLOT 2
SLOT 3
A
B
C
D
E
F
INPUT SELECT
ASPECT
AREA
MARKER
LCT1117-001B
Advertisement
Table of Contents
Related Manuals for JVC DT-V1900CG/E
Summary of Contents for JVC DT-V1900CG/E
- Page 1 MULTI-FORMAT MONITOR DT-V1900CG For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. DT-V1900CG Serial No. INSTRUCTIONS UNDER PULSE COLOR MUTING DEGAUSS SCAN CROSS SLOT 1...
-
Page 2: Safety Precautions
FCC INFORMATION (U.S.A. only) CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. -
Page 3: Table Of Contents
POWER CONNECTION The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries. -
Page 4: Controls And Features
CONTROLS AND FEATURES FRONT VIEW <Front Panel> UNDER PULSE COLOR MUTING DEGAUSS SCAN CROSS SLOT 1 SLOT 2 SLOT 3 POWER VOLUME MENU SCREENS ASPECT AREA INPUT SELECT CHECK MARKER Tally lamp Lights when the tally control signal is ON. Set the MAKE/ TRIGGER terminal’s tally control in the REMOTE (external control) terminal setup menu. -
Page 5: Rear Panel
Power lamp Unlit : The main power is OFF. Orange : The main power is ON, but the monitor’s power is OFF (in stand-by mode). Green : The main power is ON, and the monitor’s power is ON (in normal operation mode). -
Page 6: Controls And Features (Input Card: Optional)
Audio input/output terminals Input (IN) and output (OUT) terminals for audio signals. The IN and OUT terminals are bridge-connected. Connection terminal (to a Multi-Format Monitor) Attach to the connection terminal of your Multi-Format Monitor. Video input/output terminals Input (IN) and output (OUT) terminals for video signals. - Page 7 Output terminal for a selected digital signal (the input displayed on the screen). The output signal is cable- compensated. NOTE: When the monitor’s power is OFF, no digital signal is output. Input terminals for component serial digital signals Input terminals for the digital signal.
- Page 8 Input and output terminals for HD SDI 2 component serial digital signals Input (IN) and output (OUT) terminals for HD serial digital signals. Select HD SDI 2: press INPUT SELECT B/D/F button Connection terminal (to a Multi-Format Monitor) Attach to the connection terminal of your Multi-Format Monitor.
-
Page 9: Preparation
5. Secure the Input Card by replacing the screws removed in Procedure 2. NOTE : Do not touch the terminal connected to the monitor or board pattern. Do not remove slot covers from the monitor’s slots if they are not in use. -
Page 10: Attaching The Power Cord Holder
The provided Power Cord Holder prevents accidental disconnection of the AC power cord from the AC inlet. The Power Cord Holder consists of two parts; a case and cover. 1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws (provided). -
Page 11: Basic Menu Operations (Main Menu, Setup Menu)
BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) ABOUT MENU SCREENS This monitor features a MAIN MENU (main menu screen) and a SETUP MENU (setup menu screen). The MAIN MENU contains the functions normally used, and the SETUP MENU contains the settings required for initial setup. -
Page 12: How To Use "Main Menu
HOW TO USE “MAIN MENU” “MAIN MENU” ITEMS The following items appear in MAIN MENU. Items Functions APERTURE CONTROL Compensates the frequency characteristics of the input video signal. SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. sub menu POSITION Selects the display position of the sub menu superimposed on the screen. - Page 13 1080i/1035i/720p etc. is displayed or the picture is switched to the 16:9 screen ratio by pressing the ASPECT button. ● To actually display the marker, the AREA MARKER button on the monitor needs to be pressed so that it is illuminated. 16:9 14:9...
- Page 14 OFF : The marker disappears. ●To actually display the marker, the AREA MARKER button on the monitor needs to be pressed so that it is illuminated. 7. COLOR MATRIX Selects or adjusts the...
-
Page 15: How To Use "Setup Menu
“SETUP MENU” ITEMS Items Functions 1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time. 2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel. 3 COLOR TEMP./BAL. Sets or adjusts the color temperature or white balance. - Page 16 : 000 ~ 655 Function : Displays the total usage time of the monitor in hundred-hour units. ● When the timer passes 655, it returns to 000. ● The timer does not count the usage time under one hour.
- Page 17 Item : CONTRAST Adjustment range : –20 ~ 00 ~ +20 Function : For approximate adjustment of the picture contrast. Before adjustment, set the CON- TRAST knob on the front panel to 0. Item : BRIGHT Adjustment range : –20 ~ 00 ~ +20 Function : For approximate adjustment of the picture brightness.
- Page 18 HOW TO USE “SETUP MENU” 4. SIZE/POSI. ADJ. Adjusts the size or position of the picture. Press the button to display the setting menu illustrated on the right. Item : H.SIZE Adjustment range : –20 ~ 00 ~ +20 (*) Function : Adjusts the horizontal screen size.
- Page 19 6. STATUS DISPLAY Makes the status of the input signal appear or disappear on the screen. Press the button to display the setting menu illustrated on the right. Item : STATUS DISPLAY Settings : ON/OFF Function : Makes the format name appear or disappear when signals are input and the signal status appear or disappear when the input signal is changed.
-
Page 20: How To Use External Control
*2 : Selects the area marker size from AREA MARKER (setting on the main unit) or AREA MARKER-R (setting on the remote control) setting. *3 : The STATUS function is activated when the connection to the STATUS terminal is changed (ON to OFF, or OFF to ON). The monitor’s status is displayed for 3 seconds. - Page 21 Receives the termination command (!BCN0Cr) [ Sends the monitor’s status (@BOKCr) to the PC * After sending the data to the monitor, the PC must first receive the data from the monitor and then send the next command because the communication is performed in a hand-shake system. If the PC does not receive the status from the monitor after sending the command, re-send the command.
-
Page 22: Troubleshooting
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked... - Page 23 Black vertical lines may appear on the screen if the aperture grill is tilted as a result of being shaken or jolted during shipment. In this case, try tapping the monitor on the side. If this does get rid of the lines, follow the procedure below.
-
Page 24: Self-Check Indications
4. Contact your dealer with the information about which indicators are blinking. NOTE: ● If you turn on the monitor’s power immediately after turning it off (or after a short-term power failure), the self-check indicators may blink, and no image may be displayed. -
Page 25: Specifications
SPECIFICATIONS Type : Multi-Format Monitor Picture Tube : 19" measured diagonally Effective Screen Size : Width : 14-5/8" (370 mm) Height : 10-5/8" (270 mm) Diagonal : 18-1/8" (460 mm) Scanning Frequency : H : 15 kHz/15 kHz – 45 kHz V : 50 Hz –... - Page 26 Usage Precautions ● The selected signal is output from the SWITCHED OUT terminal only when the monitor’s power is turned on. ● The output signal from the SWITCHED OUT terminal is the one that is selected from the signals input to SDI 1/HD SDI 1 or SDI 2/HD SDI 2.
- Page 27 SPECIFICATIONS (INPUT CARD: OPTIONAL) IF-C01COMG: COMPONENT/RGB INPUT CARD Type : Component/RGB input card for Multi-Format Monitor Inputs/Outputs : Component (Y, P (Y: 1 V (p-p), 75 /P Synchronized signal (HD/C * The input (IN) and output (OUT) terminals are bridge-connected. Auto termination.
- Page 28 (1-3/4" x 6-1/8" x 7-5/8") © 2002 VICTOR COMPANY OF JAPAN, LIMITED (cont'd) JVC PROFESSIONAL PRODUCTS COMPANY DIVISION OF US JVC CORP. 1700 Valley Road Wayne, N.J. 07470 JVC CANADA INC. 21 Finchdene Square, Scarborough Ontario M1X 1A7 Printed in Japan...