Table of Contents
Advertisement
Maintenance
Cleaning
Exterior
The exterior surfaces of the IDP-15 may be cleaned with alcohol or mild detergents only.
Interior
Run the pump periodically with the inlet open at atmosphere for a minute or two to flush it
out. For more information, see "Cleaning the Pump" on page 36.
Kits and Service Options
Agilent pumps will provide many years of trouble-free service if the maintenance
procedures and intervals are observed. Cleaning and tip seal replacement are
recommended when pump base pressure has risen to an unacceptably high level for your
application. If your pump exhibits humming or grinding noises from the bearings, a major
overhaul should be done by Agilent personnel or an authorized rebuild center. Advance
exchange pumps are available to minimize downtime.
The service kits needed for routine minor maintenance including a tip seal change and
advance exchange pumps are shown in Table 9 and are available from your Agilent dealer. A
complete list of service and accessory kits is available on Agilent's website.
Table 9
Part
Number
X3815-67000
X3815-69000
X3815-69010
IDP-15 Dry Scroll Vacuum Pump
IDP-15 Service Kits and Advance Exchange Pumps
Description
Replacement
Tip Seal Set
Exchange IDP-15
Standard
Exchange IDP-15
Pumps with VPI
Valve
40
Contents
Replacement Tip Seal,
O-ring, and grease
IDP-15 Exchange Pumps
IDP-15 VPI Valve Exchange
Pumps
Advertisement
Table of Contents
