Rear - Eizo ColorEdge CG2700X User Manual

1 | Introduction

1.2.2 Rear

7
1. Handle
2. Security lock slot
3. Lock button
4. USB-A connector
(downstream)
5. Cable holder
*1
6. Stand
7. Main power switch
8. Power connector
9. HDMI connector
10. DisplayPort connector
11. USB-C connector
(upstream)
12. LAN port (RJ-45)
13. USB-B connector
(upstream)
*1
An optional arm (or optional stand) can be attached by removing the stand section.
12
3
2
8
This handle is used for transportation.
Complies with Kensington's MicroSaver security system.
Use this button to remove the monitor from the stand.
Connects to a peripheral USB device.
Holds the monitor cables.
Adjusts the height and angle (tilt and swivel) of the monitor. The
monitor can also be rotated vertically.
Turns the main power on or off.
: On,
Connects the power cord.
Connects to an external device with HDMI output.
Connects to an external device with DisplayPort output.
Connects to an external device with USB-C output. This also
transmits the USB signal that is necessary for using software that
requires a USB connection or the Docking Station Function (see
Using the Docking Station Function
When using the network connection of the Docking Station Function,
connect the modem or router using a LAN cable (see
Docking Station Function
for network connection.
Connect using USB cable when using software that requires a USB
connection. The blue connector.
5
6
9 10
: Off
[} 68]).
[} 68]). A USB-C connection is required
1
11 12 13
Using the
4