Eizo ColorEdge CG2700X User Manual page 21

Note
• If you select "HLG", you must set "HLG System Gamma".
PQ Option
Settings: "300cd/㎡ Clipping" / "500cd/㎡ Emulation" / "1000cd/㎡ Emulation" / "4000cd/㎡
Emulation" / "10000cd/㎡ Emulation"
Areas with brightness equal to or greater than the value set here are displayed as clipping
or emulation at this setting value for the PQ signal that is input to the monitor.
• "300cd/㎡ Clipping"
Setting used to check the display of monitor with maximum brightness of 300 cd/m
Input video level of 637 (10 bits) or more is clipped.
• "500cd/㎡ Emulation"
Setting with which the image is properly displayed when monitor brightness is set to 500
2
cd/m . If the monitor brightness is less than 500 cd/m
• "1000cd/㎡ Emulation"
Setting with which the image is properly displayed when monitor brightness is set to
2
1000 cd/m . This setting is used for a temporally check because this monitor cannot
display 1000 cd/m
• "4000cd/㎡ Emulation"
Setting with which the image is properly displayed when monitor brightness is set to
2
4000 cd/m . This setting is used for a temporally check because this monitor cannot
display 4000 cd/m
• "10000cd/㎡ Emulation"
Setting with which the image is properly displayed when monitor brightness is set to
2
10000 cd/m . This setting is used for a temporally check because this monitor cannot
display 10000 cd/m
Note
• This can be set when "PQ" is specified for "Gamma (EOTF)".
• You can check the areas where clipping or emulation occurs. For more information, see
Luminance Warning
• For relation between input and output for each setting, see
Option [} 72].
HLG Option
Settings: "Off" / "HLG300"
When selecting "HLG300" with the brightness set to 300 cd/m
the monitor, any areas exceeding 300 cd/m
these areas.
Note
• This can be set when "HLG" is specified for "Gamma (EOTF)".
HLG System Gamma
Settings: "1.0" – "1.5"
Adjust the system gamma value for the HLG signal that is input to the monitor.
2
. All gradients are emulated.
2
. All gradients are emulated.
2
. All gradients are emulated.
[} 30].
2
Advanced Adjustments/Settings | 3
2
, all gradients are emulated.
Setting and Display Method of PQ
2
for the HLG signal input to
will be clipped. Selecting "Off" will not clip
2
.
21