Table of Contents
Advertisement
●
Rear
6
7
14
15
6. Handle
7. Security lock slot
8. Lock button
9. Headphone jack
10. Stereo mini jack
11. USB Type-A
connector (USB
downstream port)
12. Cable cover
*1
13. Stand
14. Main power switch
15. Power connector
16. Input signal
connectors
17. USB Type-B
connector (USB
upstream port)
*1 An optional arm (or optional stand) can be attached by removing the stand section.
12
13
16
This handle is used for transportation.
Complies with Kensington's MicroSaver security system.
Use this button to remove the monitor from the stand.
Connects to headphones.
If you connect an external device using the stereo mini jack cable, external audio
can be output from the monitor.
Connects to a peripheral USB device
Holds the monitor cables.
Adjusts the height and angle (tilt and swivel) of the monitor.
Turns the main power on or off.
Connects the power cord.
The following connectors are available on the monitor rear in order of left to right.
DVI connector
HDMI connector
DisplayPort connector 1
DisplayPort connector 2
Connect the USB cable when using software that requires USB connection or when
using the USB hub function
17
(page
35).
: On,
: Off
(page
35).
8
9
10
11
11
Chapter 1 Introduction
9
Advertisement
Table of Contents
