Eizo ColorEdge CG2700X User Manual page 25

Color management lcd monitor
Table of Contents

Advertisement

When specifying the color temperature, set the color temperature in units of 100 K or select
a color temperature according to each standard.
Note
• When color coordinates are specified, the color temperature is changed to "User".
Target Settings - White Point - White(x) / White(y)
Settings: "0.2400" – "0.4500"
For more information, see
Target Settings - Gamma (EOTF) - Gamma (EOTF)
Settings: "1.00" – "2.70" / "sRGB" / "EBU(2.35)" / "L*" / "PQ" / "HLG" / "User" / "Fixed"
Set the gamma that will be used as the calibration target for SelfCalibration.
Set the gamma, or select the gamma curve defined by each standard.
Target Settings - Gamma (EOTF) - Gamma Policy
Settings: "Standard" / "Gray Balance" / "Fixed Gamma"
Select the gamma adjustment method for SelfCalibration.
• "Standard"
Adjust the gray balance while retaining the contrast.
• "Gray Balance"
Adjust the monitor so that the chromaticity of the middle tone area equals the white
point.
• "Fixed Gamma"
Select to use specific gamma settings.
Attention
• If "HLG" is specified for "Gamma (EOTF)", "Fixed Gamma" is selected and this setting cannot be
changed.
• With "Gray Balance", all points of the grayscale are adjusted toward the target white point. Select
this to prioritize whiteness when correcting the middle tone area. However, the following
restrictions apply when "Gray Balance" is selected:
– The contrast may decrease.
– The color gamut may be narrower than when adjusting with "Fixed Gamma".
Target Settings - Gamma (EOTF) - PQ Option
Settings: "300cd/㎡ Clipping" / "500cd/㎡ Emulation" / "1000cd/㎡ Emulation" / "4000cd/㎡
Emulation" / "10000cd/㎡ Emulation"
Set the PQ option that will be used as the calibration target for SelfCalibration.
Note
• This can be set when "PQ" is specified for "Gamma (EOTF)".
Target Settings - Gamma (EOTF) - HLG Option
Settings: "Off" / "HLG300"
Set the HLG option that will be used as the calibration target for SelfCalibration.
Target Settings - White Point - Temperature
Advanced Adjustments/Settings | 3
[} 24].
25

Advertisement

Table of Contents
loading

Table of Contents