Table of Contents
Advertisement
7 | SDR/HDR Settings
Note
• It is recommended to perform "Reset" in "Color" before configuring the settings.
7.3 Settings with ColorNavigator 7
You can use ColorNavigator 7 to configure monitor settings suitable for SDR or HDR
display. It is recommended to use ColorNavigator 7 to calibrate the monitor for the following
cases.
• To perform regular calibration
ColorNavigator 7 has a function to notify when to perform calibration.
• To verify whether the monitor is properly calibrated
ColorNavigator 7 has a function to verify calibration status.
Note
• For more information about how to perform adjustment by operating only the Setting menu of the
monitor, see
• For more information about ColorNavigator 7, refer to our web site.
(www.eizoglobal.com/products/coloredge/cn7)
7.3.1 Setting Procedure
1. Select a color mode in the Setting menu in the monitor.
See step 1 in
2. Display "Signal" in the Setting menu of the monitor, and configure the settings required.
See step 2 in
3. Start ColorNavigator 7.
4. Point at the color mode selected in the color mode list, right-click, and set the color
mode type to "Advanced".
5. Set the adjustment target according to the application.
For more information, see
7.3.2 Target Settings of ColorNavigator 7
-: Cannot be changed
Color Mode Type
Brightness (cd/㎡)
White Point
Gamma (EOTF)
PQ Option
HLG Option
HLG System
Gamma
Adjustment Method Standard
Color Gamut
(Standard Value)
Gamut Clipping
58
Setting Procedure
[} 57].
Setting Procedure [} 57]
Setting Procedure [} 57]
Target Settings of ColorNavigator 7
BT.2020
*1
Advanced
Advanced
100
100
D65
D65
2.4
2.4
-
-
-
-
-
-
Standard
BT.2020
BT.709
On
On
to configure the setting.
to configure the setting.
BT.709
DCI-P3
*1
*1
Advanced
48
D65
2.6
-
-
-
Standard
DCI-P3
On
[} 58].
PQ_DCI-P3
HLG_BT.2100
*1
Advanced
Advanced
100
100
D65
D65
PQ
HLG
300cd/㎡
-
Clipping or
1000cd/㎡
*2
Emulation
-
Off or
HLG300
-
1.0 or 1.2
Standard
Standard
DCI-P3
BT.2020
On
On
*1
*2
*2
Advertisement
Table of Contents
