Iwatsu ADIX APS Quick Reference Manual page 8

To Answer Messages
When the [MESSAGE] button lamp is lit at your
extension
Lift the receiver
Press the [MESSAGE] button until the desired
extension number is displayed
Press
The system will automatically call back the
extension that left the message.
Paging
Lift the receiver
Hold down the [PAGE] button
When you hear the confirmation tone, make your
announcement by speaking into the receiver
Release the [PAGE] button and hang up
Whisper Page
You may communicate with a busy station without
interrupting their call using the Whisper Page feature.
To communicate with a busy extension:
After calling a busy station, press the
You may now speak to that extension
To Respond to Whisper Page
After receiving a whisper page while on a call,
Press the button to speak with the extension
that called using the whisper page feature
Press the button a second time to resume
speaking with the original calling party
Note: The original calling party cannot hear the
whisper page or your response to a whisper page.
To Respond to Whisper Page with a Text Message
After receiving a whisper page while on call follow
the procedures in "Text Messaging"
Personal Ringing Tones
You may choose one of eight different ringing tones
to distinguish your station from others.
To play a ringing tone at your system extension
With your station idle press [FEAT] +
+ -
To select a ringing tone for your system extension
With your station idle press [FEAT] +
+ - +
To restore default ringing tone at your system
extension
With your station idle press [FEAT] +
button
+
+  +
+
13
Speed Dial
Personal Speed Dial Registration - To register
personal speed dial numbers
Press the [FEAT] button.
Press the [SPEED] button, then dial the desired
PERSONAL SPEED ACCESS CODE (90-99).
Enter the phone number.
Press [FEAT] to end the operation.
Personal Speed Dial Registration - To register several
speed dial numbers
Press the [FEAT] button
Press the [SPEED] button, then dial the desired
PERSONAL SPEED ACCESS CODE (90-99).
Enter the phone number.
Press the [SPEED] button, enter another speed dial
code number
Repeat same procedure.
Press the [FEAT] button.
To register a pause time
At the desired location, press [HOLD/DND]
Dial  to for the desired pause time in seconds.
To set an outside line to be selected for speed
dialing
Do not lift receiver
Press the [FEAT] button
Press [SPEED] and
PERSONAL SPEED DIAL CODE (90-99)
Dial the desired outside line group number (01-60 or 00)
Press [FEAT] to end the operation
To register a directory name for a speed dial
number
Do not lift receiver
Press the [FEAT] button
Press the [SPEED] button and
PERSONAL SPEED DIAL CODE (90-99)
Register the letters of the name using the dial pad
Press the button until the desired letter is displayed,
then press the [HOLD/DND] button to enter that letter
+
or number (up to 10 characters).
-,.,[space],1
G,H,I,4
P,R,S,7
Alphanumeric
[FEAT]All delete
Press [FEAT] to end the operation
To Speed Dial a Number
, then dial the desired
, then dial the desired
A,B,C,2 D,E,F,3
J,K,L,5 M,N,O,6
T,U,V,8 W,X,Y,9
Q,Z,0
Upper/lower case
[HOLD]Enter/1 character delete
14