within a speed dial number dial
desired pause time in seconds (1-9).
To Register a [*]: When registering the
telephone number, at the place where you want
to insert a [*], dial
* This code is programmed by your system administrator
To Speed Dial A Number
From A Touch Tone Phone
Lift the receiver
Press
, then dial the Speed Dial Code for
the number you want to call
The system automatically dials the registered
number
From A Rotary Dial Phone
Lift the receiver
Dial the Speed Dial Access code
Dial the Speed Dial Code for the number that
you want to call
The system automatically dials the registered
number
Message Waiting
To Leave A Message
When the extension you are calling is busy or
does not answer:
Do not hang up
Quickly press and release the receiver button
Dial the Message code
When you hear the confirmation tone hang
up
If the extension you called is an ADIX digital
telephone, the lamp on the message button
[MSG] will light. If it is a single line telephone
with a message lamp, the message lamp on the
phone will flash.
To Cancel Message Waiting
If you want to cancel a message you left at an
extension:
Lift the receiver
Dial the Cancel code and the Message
code
Dial the extension number
When you hear the confirmation tone hang
up
The Message button [MSG] lamp at the
extension will be extinguished.
and the
Universal Night Answer
If you need to pick up an incoming call when
the system is in the night mode:
Note: In some cases, available features and feature operation
may differ from those listed in this guide, depending on the
hardware, software, and programmed functions in your ADIX
system. For more information, contact your authorized
Iwatsu distributor.
Lift the receiver
Dial the Universal Night Answer code [546]
You will be connected to the incoming call