Master Hunt Groups; Message Waiting - Iwatsu ICON Series Quick Reference Manual

Master Hunt Groups

The Iwatsu Enterprise-CS allows extensions to be
programmed into Hunt Groups. Each Hunt Group is
assigned code and when dialed the system
searches for the first idle extension.
To Call a Hunt Group
• Lift the receiver.
• Wait for the dial tone.
• Dial Hunt Group access code.
or
• Press HUNT if assigned as a Multipurpose key.

Message Waiting

Note: This feature is not available if the MBOX key
is used for voicemail access.
To Leave a Message
When the extension you are calling is busy or does
not answer:
• Do not hang up.
• Press the MESSAGE key and
• After you hear the confirmation tone, hang up.
The MESSAGE key lamp will stay lit at the called
extension.
To Cancel Message Waiting
If you want to cancel a message you left at an ex-
tension:
• Lift the receiver.
• Press the MESSAGE key and
extension number.
• After you hear a confirmation tone, hang up.
The MESSAGE key lamp will go out at the exten-
sion.
To Answer Messages
When the MESSAGE key lamp is lit at your exten-
sion:
• Lift the receiver.
• Press the MESSAGE key until the desired exten-
sion number is displayed.
• Press
.
The system will automatically call back the exten-
sion that left the message.
Paging
• Lift the receiver or press the SPEAKER key.
• Press the PAGE key or dial the page access
code.
• When you hear the confirmation tone, make your
announcement by speaking into the receiver.
• Hang up or press the SPEAKER key to end the
page.
17
.
, then dial the