Agilent Technologies E1439 User Manual page 183

age1439_smb_clock_output
Specifies which clock to output from the SMB clock connectors. This description also includes
the query function:
VXIplug&play Syntax
ViStatus age1439_smb_clock_output(ViSession id, ViInt16 smbClock);
ViStatus age1439_smb_clock_output_get(ViSession id, ViPInt16 smbclockPtr);
Note
This command should be used only for specialized custom clock requirements. Most useful clock
setups can be supplied by age1439_clock_setup.
Description
This function selects the source of the output for the front panel SMB clock connectors.
Parameters
id is the VXI instrument session pointer returned by the age1439_init function.
smbClock AGE1439_BNC_CLOCK
connectors.
AGE1439_CLOCK_OFF
AGE1439_DIVIDED_ADC_CLOCK
SMB clock connectors.
AGE1439_VXI_CLOCK
smbClockPtr Returns a pointer to the current value of smbClock.
Return Value
AGE1439_SUCCESS indicates that a function was successful.
Values other than AGE1439_SUCCESS indicate an error condition or other important status
condition. To determine the error message, pass the return value to
page
See Also
"Default values" on page
"age1439_front_panel_clock_input" on page
age1439_smb_clock_output_get
#include "age1439".h
specifies that the BNC input be output from the SMB clock
specifies no output from the SMB clock connectors.
specifies that the VXI clock be output from the SMB clock connectors.
102.
201,
Agilent E1439 Programmer's Reference
specifies that the divided ADC clock be output from the
"age1439_init" on page 132,
131, "Using clock and sync" in chapter 3
Functions listed alphabetically
"age1439_error_message" on
"age1439_clock_setup" on page 78,
173